Gate Repair in West Palm Beach - Fixed Today, No Surprise Invoice

Trusted Gate Repair for West Palm Beach Homeowners

Gate repair in West Palm Beach typically runs between $180 and $1,400 depending on what failed. A bent hinge or worn latch sits at the low end, while a full operator replacement on a heavy driveway gate lands higher. The coastal air here accelerates rust on iron and steel hardware, and afternoon thunderstorms stress older motors. We’re Latch and Post Gate Repair West Palm Beach, part of the Cedarwell family and independently owned and operated since 2009. Cody Beckman leads our local team, and we answer every call with a live person, 24 hours a day. If your gate is sagging, grinding, or refusing to open, our Automatic Gate Repair team is ready to help-call us at (728) 203-0817 and we’ll give you a written price before any work begins.

Call (728) 203-0817

Key Takeaways

• Most gate repairs in West Palm Beach cost $180 – $1,400. You’ll see the exact number in writing before we touch anything.
• We answer live, 24/7. No voicemail, no callback queue, nights and weekends included.
• Every job includes shoe covers, drop cloths, and a cleanup photo. Your floors stay clean and you see proof before we leave.
• 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print.
• Factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.

Driveway Gate Repair

Driveway Gate Repair is the work we do most often in West Palm Beach, from single-swing gates in the historic neighborhoods south of Southern Boulevard to long slide gates in newer communities like The Acreage. Driveway gates take daily abuse from sun, rain, and salt air, and when a wheel, hinge, or opener fails, the gate usually stops halfway or refuses to move. Our technicians arrive with a written price for the specific repair, lay down drop cloths around the work area, and put on shoe covers before stepping anywhere inside your property. Most driveway gate repairs run $200 to $1,200 depending on the component.

Swing Gates Off Track

When a swing gate drags or binds, the hinge posts have usually shifted in the sandy South Florida soil. We re-set the posts, perform Gate Realignment, and lubricate the hinges with a pet-safe lubricant where there’s a choice. You’ll get a photo of the finished job before we leave.

Opener Motor Failure

Salt in the coastal air attacks electrical connections on driveway gate openers faster than people expect. We diagnose whether the motor, the control board, or the limit switches failed, and we replace only what’s broken. Written price first, every single visit.

Gate Welding

Gate Welding is the fix when metal has actually torn, cracked, or separated, rather than just misaligned. We see this often in West Palm Beach where rust thins the steel at weld joints and a storm gust finishes the job. Our welders repair the broken section on site when practical, using techniques suited to the gate’s material and coating. Most gate welding repairs run $150 to $600 for a single point repair, with the exact number in writing before we strike an arc. If the gate is galvanized or powder coated, we’ll tell you before we start how we’ll treat the repaired area to slow future rust.

Cracked Hinge Mounts

Hinge mounts crack when the gate’s weight shifts or the wind catches it repeatedly. We weld the mount, reinforce the surrounding metal, and perform Hinge & Post Repair so the stress isn’t concentrated in the same spot again.

Broken Pickets and Rails

Storms in West Palm Beach bend and snap individual pickets on iron and aluminum gates. We weld in matching material, grind the joints smooth, and touch up the finish so the repair doesn’t stand out like a scar.

Commercial Gate Repair

Commercial Gate Repair covers gates that see traffic all day: apartment communities, office complexes, warehouses, and HOA entrances throughout West Palm Beach and surrounding cities. These gates cycle hundreds of times daily, and the failure mode is usually mechanical, worn rollers, bent tracks, failed limit switches, or burned motor contactors. We carry commercial-grade replacement parts for FAAC, LiftMaster, DoorKing, and Elite operators, and we keep the work area clean with drop cloths and shoe covers even in a parking lot. Most commercial gate repairs run $300 to $1,400 depending on the component and access.

High-Cycle Operator Service

A community gate that cycles 300 times a day wears out faster than a residential gate that cycles 20 times. We service the operator, the photo eyes, and the safety edges as one system, not isolated parts.

Track and Roller Replacement

Commercial slide gates drag when rollers flatten or tracks fill with sand and debris. We replace worn rollers, clear the track bed, and adjust the gate so it rolls without grinding. This is the most common repair at apartment communities near Palm Beach Gardens and Riviera Beach.

Iron Gate Repair

Iron Gate Repair in West Palm Beach almost always involves rust. The salt air, high humidity, and frequent rain mean bare iron corrodes quickly once the paint or powder coat is scratched. We remove the rust with a wire wheel, treat the surface with a rust converter, prime, and repaint so the repair lasts. We also check the hinges, latch, and welds for hidden damage while we’re there. Most iron gate repairs run $180 to $700 depending on the extent of the corrosion and whether welding is required.

Rust Through at the Bottom Rail

The bottom rail is the first place iron gates rust through because water pools there after every storm. We cut out the rotted section, weld in fresh steel, and coat the repair so water can’t sit in the same spot.

Hinge Failure from Corrosion

When iron gate hinges seize or snap, the gate sags and the latch misses the post entirely. We replace the hinges with stainless steel hardware during Lock Repair and hinge service, which holds up far longer in West Palm Beach’s climate than the original carbon steel.

Sliding Gate Repair

Sliding Gate Repair addresses the cantilever and track-style sliding gates common on larger West Palm Beach properties and ranch-style lots in The Acreage. A sliding gate that shudders, squeals, or stops mid-travel usually has a wheel, roller, or track problem. We replace the worn rollers with sealed bearing units, clean and level the track, and adjust the chain or belt tension. Most sliding gate repairs run $200 to $900. We’ve seen gates that were declared dead that only needed two new rollers and a track scrape to roll like new.

Worn Cantilever Rollers

Cantilever gates hang on internal rollers that grind themselves flat over time. When the gate starts to droop or scrape the driveway, the rollers are done. We replace them in pairs so the gate hangs level.

Chain and Belt Drives

A stretched chain or a cracked belt causes jerky starts and stops on a sliding gate. We tension or replace the drive, check the sprockets or pulleys for wear, and test the gate under full load before we call the job done.

Wrought Iron Gate Repair

Wrought Iron Gate Repair is a specific craft in West Palm Beach because true wrought iron is no longer manufactured, most gates sold as “wrought iron” today are mild steel or tubular steel. The distinction matters for repair because authentic wrought iron welds differently and bends differently than steel. We assess the actual material before we start and match our repair method to what’s really in front of us. Most wrought iron gate repairs run $180 to $800. Homeowners in the older neighborhoods of West Palm Beach, especially the historic districts, ask us about this distinction more than anyone else.

Matching Decorative Elements

Reproducing the curved scrolls and twisted pickets on a wrought iron gate takes care and patience. We match the section profile and the curve geometry so the replacement piece reads as original, not as a patch.

Repainting and Protective Coating

After any structural repair, we prep and coat the repaired area to match the existing finish. In West Palm Beach’s salt air, a proper finish is the difference between a repair that lasts five years and one that lasts twenty.

Metal Gate Repair

Metal Gate Repair covers aluminum, steel, and composite metal gates, which make up the majority of gates in West Palm Beach’s newer communities. Aluminum gates don’t rust the way iron does, but they oxidize, the powder coat chalks, and the hardware still corrodes. Steel gates are stronger but heavier, and they stress their hinges and posts more. We repair both materials, and we replace hardware with stainless steel fasteners that resist the coastal environment. Most metal gate repairs run $150 to $700.

Aluminum Frame Stress Cracks

Aluminum gates develop hairline cracks at the corners where the frame meets the pickets. We weld or bracket these joints, depending on the aluminum’s thickness and the gate’s design.

Hardware Corrosion Replacement

Latches, hinges, and spring catches on metal gates in West Palm Beach corrode faster than the gate itself. We replace the hardware with stainless steel equivalents so the gate doesn’t need the same repair twice.

Wood Gate Repair

Wood Gate Repair in West Palm Beach means fighting moisture, termites, and sun. A wood gate here can rot at the bottom, warp in the humidity, or split at the joints within a few years. We replace rotted boards with pressure-treated lumber or cedar, re-square the frame, and seal the wood so it holds up better in Florida’s climate. We also check for termite damage while we’re there, because a gate is a perfect entry point for termites heading toward your house. Most wood gate repairs run $150 to $500.

Rotted Bottom Sections

Water wicks up from the ground into the bottom of a wood gate, and that’s where the rot starts. We replace the damaged boards, install the gate with a small ground clearance, and seal the end grain to slow future moisture uptake.

Sagging and Warped Frames

Humidity makes wood swell, and then the afternoon sun bakes it dry, and the cycle warps the frame. We add diagonal bracing or rebuild the frame with kiln-dried lumber, then re-hang the gate so the latch lines up cleanly.

Brands We Service

We’re factory-trained on LiftMaster, the brand we see most often on residential driveway gates in West Palm Beach. LiftMaster operators use encrypted remotes and battery backup, and a failure is usually a simple fix: a capacitor, a gear, a limit switch. We stock the common LiftMaster parts on our trucks so the first visit is usually the only visit.

We also service FAAC, which dominates the commercial and high-end residential market, and Mighty Mule, the go-to for DIY-installed solar gate openers. Elite operators show up on many HOA entrances. Whether you have one of these or another make entirely, we can diagnose it and give you a written price before we start.

Signs You Need a Pro Right Now

• The gate scrapes the driveway or ground. A gate dragging on concrete means rollers are flat, hinges are worn, or a post has shifted. Continuing to run it wears the motor and can burn out the operator in weeks.
• The remote works only some of the time. Intermittent operation usually points to a failing receiver, a dying battery in the operator, or a wiring connection corroding inside the housing.
• The gate reverses without touching anything. This is usually the safety edge or photo eye triggering falsely. It’s a safety system, so don’t bypass it. It needs a proper diagnosis.
• You hear grinding or squealing during travel. That’s a mechanical failure warning. Grinding means metal on metal where a roller or hinge has failed. Run it longer and the repair cost goes up.
• The gate sags visibly when opened halfway. A sagging gate stresses every hinge and the opener. The longer it hangs wrong, the more parts get damaged.

Our Process, Step by Step

1. 1
   You call and a live person answers. No voicemail, no callback queue. We ask what the gate is doing, take your address, and schedule a time that works for your family. If it’s an emergency, we tell you exactly when we’ll be there.
2. 2
   We arrive and look first. The technician starts with a full walk-around of the gate, opener, hinges, rollers, and the area around the posts. We check the safety edges, the photo eyes, and the manual release before we open a single panel.
3. 3
   You get a written price. Before any work starts, we write down exactly what’s wrong, what we’ll do, and what it costs. No pressure, no surprise add-ons. You decide if we proceed.
4. 4
   We repair with care for your home. Shoe covers on, drop cloths down, quiet tools if kids are sleeping. We clean up like it is our own home and ask before we move or touch anything on your property.
5. 5
   You get a cleanup photo and a promise. Before we leave, we photograph the worked area so you can see the clean-up. Every job is covered by the 365-Day Done Right Promise: if it’s not right, we make it right.

How Much Does Gate Repair Cost in West Palm Beach?

Our Service Area Near West Palm Beach

We serve homeowners throughout central Palm Beach County. Our Gate Repair in West Palm Beach coverage includes the historic neighborhoods along Flagler Drive, the communities off Okeechobee Boulevard, and everything in between. We also serve Gate Repair in Palm Springs, Gate Repair in Wellington, Palm Beach Gardens, Royal Palm Beach, North Palm Beach, Lantana, The Acreage, Lake Worth, Palm Beach, Westgate, and Riviera Beach. Typical scheduling runs one to two days for most non-emergency repairs, with emergency service available 24/7.

Frequently Asked Questions About Gate Repair in West Palm Beach

Schedule Your Gate Repair Service in West Palm Beach Today

A gate that won’t open or won’t close is a problem you shouldn’t put off. Call Latch and Post Gate Repair West Palm Beach at (728) 203-0817 and you’ll talk to a live person, not a voicemail. We’ll give you a free estimate and a written price before any work starts. Every visit includes shoe covers, drop cloths, and a cleanup photo, and every job is backed by the 365-Day Done Right Promise.

Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving West Palm Beach since 2009.