Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Lantana
Gate installation in Lantana comes with a specific set of demands other parts of Palm Beach County don’t face: salt spray off the Intracoastal, saturated canal-side soil, and wind loads that turn a solid gate panel into a sail. We’ve built our gate installation approach around those exact conditions. A standard pedestrian or driveway gate installation in Lantana typically runs $1,800 to $5,400 depending on material, automation, and post footing work. Call (728) 203-0817 for a free estimate, and we’ll give you a written price before any work starts.
Why Latch and Post Gate Repair West Palm Beach Is Lantana’s Preferred Gate Installation Company
Lantana homeowners keep calling us back because we treat gate installation as a marine-environment job, not a generic fence post in the ground. Our crews know the difference between a swing gate on a dry inland lot and one on Marine Drive where salt air eats standard zinc hardware inside a year. We stock stainless steel hinges, fasteners, and operator enclosures specifically for canal-front properties, and we don’t have to special-order them every time.
We’re part of the Cedarwell family of independently owned gate specialists, operating since 2009. Cody Beckman leads our team. Every technician is background-checked, uniformed, and factory-trained on FAAC, BFT, Linear, and Viking equipment, so the operator going onto your gate is one we know well. Before we step inside your Lantana home to run wiring or access a control panel, we put on shoe covers and lay drop cloths. We finish every visit with a photo of the cleanup before we leave.
Response time to Lantana is quick. Scheduling is coordinated from our South Florida office, and local crews serve Lantana directly. For most installations, we can get a technician to your property within a day or two to measure, assess the soil and existing post condition, and give you a written quote. Calls are answered by a live person 24 hours a day, seven days a week, no voicemail queue.
Styles & brands we work with
Gate Fabrication in Lantana
Gate fabrication in Lantana matters more than in most places because stock panels from big-box suppliers aren’t built for salt exposure and hurricane wind load. When we fabricate a gate for a Lantana home, we start with the actual conditions on your property: proximity to the Intracoastal or a canal, soil type at the post locations, existing post condition, and the look you want. We build gates with marine-grade structural materials and corrosion-resistant coatings as the default on waterfront lots, not as an upsell.
Materials Built for Salt Air
On canal-front streets like South Lake Drive, we specify aluminum or marine-grade stainless steel for frames, hinges, and fasteners. Powder coating alone won’t hold up to daily salt spray; the base metal matters. A fabricated aluminum security gate for a standard Lantana driveway runs $2,800 to $6,500 installed, depending on infill style, automation, and the condition of your existing posts.
Custom Sizing and Match
Many Lantana homes from the 1950s and 1960s have non-standard gate openings. A stock panel won’t fit, and forcing one means sloppy gaps at the latch post. We measure precisely, fabricate to the opening, and include adjustable hinges so the gate can be fine-tuned as the post settles. For a pedestrian gate on a gated courtyard or pool entry, expect $1,200 to $3,200 fabricated and installed.
Automatic Gate Installation in Lantana
Automatic gate installation in Lantana is where we see the most callbacks from other companies’ work. The salt air, high water table, and storm winds each attack a different part of the system: the control board, the post footings, and the operator gears. We install automatic operators on swing and slide gates with those failure points addressed from day one, including sealed operator enclosures, deeper footings, and solar backup where the property calls for it.
Swing Gate Operators on Canal Lots
For a swing gate on a Lantana canal lot, we recommend operators with sealed control boards and battery backup. Salt air corrodes exposed control terminals quickly, which is why our installs include dielectric grease on connectors and gasketed enclosures. A complete automatic swing gate system for a double driveway gate runs $3,200 to $7,800 installed, including the operator, safety edges, and two remotes.
Slide Gates Where Space Is Tight
Lantana lots, especially the older single-family homes along the canals, often have short driveways with little room for a swinging gate arc. A slide gate operator solves that, but the rack and pinion teeth need protection from salt and wind-blown sand. Our slide gate installs include marine-rated racks and operator covers. A single slide gate system with a Linear or BFT operator typically runs $2,900 to $6,800 in Lantana.
Trusted Brands We Service in Lantana
We install and service operators from FAAC, BFT, Linear, and Viking, which covers most of the equipment already mounted on Lantana gates. Because so many canal-front homes run FAAC hydraulic operators or Linear slide gate units, we keep common parts and seals on hand and can usually complete repairs the same visit rather than ordering parts and returning a week later. If you already own a Viking swing gate operator and want it re-installed on a new gate, we can do that too. The right operator, properly sealed and wired, lasts years longer in Lantana’s salt air than a unit that was never meant for coastal conditions.
Common Gate Installation Problems We See in Lantana Homes
- Solid infill gates catching hurricane-force wind. A solid panel is a sail. Without proper post embedment and reinforcement, the hinge bolts tear out or the post itself leans before the panel fails. We size footings and hardware for the wind speed your lot actually sees.
- Salt-corroded hinges and keypads on waterfront streets. Gates on South Lake Drive and Marine Drive seize up or lose keypad function within a year when standard zinc hardware is used. We replace with stainless steel and sealed keypads as standard on those streets.
- Rack and pinion teeth stripped on slide gates. Saturated, high-water-table soil settles unevenly, binding the gate and causing the motor to grind the rack. We bed slide gate tracks and racks on compacted, drained foundations to prevent that.
- Operator control boards failing from salt exposure. The board inside the enclosure corrodes even when the box looks fine. Salty humid air gets through standard seals. We replace boards and retrofit enclosures with gasketed, corrosion-resistant housings.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Lantana, FL
A standard single swing gate installation in Lantana runs $1,800 to $4,200. A double driveway swing gate with an automatic FAAC or BFT operator starts around $4,500 and goes up to $9,500 for fabricated panels with corrosion-resistant hardware. Slide gate installations run $2,900 to $6,800. Pedestrian gate fabrication and installation runs $1,200 to $3,200. What moves the number: gate width and weight, automation (or solar), the condition of existing posts, and whether we’re digging new footings in canal-side soil. You’ll see every line item in writing before we start. No surprises after the fact.
We Also Serve Cities Near Lantana
Our Gate Installation team works throughout central Palm Beach County. We serve Lantana along with nearby West Palm Beach, Palm Springs, Wellington, and Palm Beach Gardens. If you’re a few minutes outside Lantana proper, call and we’ll confirm coverage for your street.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lantana
A solid infill gate on a Lantana canal lot should be engineered for at least 130 mph sustained wind gust exposure, roughly the design wind speed for the Intracoastal corridor in Palm Beach County, not the inland standard of 110 to 120 mph. That means deeper concrete footings, larger post sections or steel reinforcement inserts, and through-bolted hinge hardware rather than lag screws. On canal-front lots, we often increase post embedment by 12 to 18 inches beyond code minimum because saturated soil doesn’t hold a post under lateral wind load the way dry inland soil does. Call (728) 203-0817 for a written load assessment on your existing gate.
Most swing gate operators made by FAAC, BFT, Linear, and Viking include a manual release mechanism, usually a keyed release on the operator housing or a pull handle that disengages the drive arm. Turn the key or pull the release, then push the gate by hand slowly. If the gate won’t move after releasing, a post has likely shifted from saturated soil or debris is blocking the track, and you should call us rather than forcing it. We install battery backup systems on new Lantana gate installations specifically so a post-storm outage doesn’t leave you unable to get your car out. Call (728) 203-0817 and we’ll walk you through your specific operator model.
Because the enclosure cover traps humid salt air inside, and standard gaskets don’t stop the fine salt mist that hangs over the Intracoastal on a southeast breeze. The control board and terminals corrode from the inside even when the box looks clean outside. That’s why on South Lake Drive and similar waterfront streets in Lantana we replace boards and retrofit enclosures with marine-grade gasketed housings, add dielectric grease to every connector, and specify operators with conformal-coated circuit boards. Salt exposure is not a maintenance problem you can wipe off; it’s a specification problem at install time. Call (728) 203-0817 and we’ll inspect your current enclosure.
Yes, and on many Lantana canal lots a solar gate opener is a good choice, especially where running 120-volt power to the gate post means trenching across a saturated yard or under pavers. Solar operators run off a panel and battery, so a post-storm power outage doesn’t shut your gate down. For coastal Lantana, we specify marine-grade battery enclosures and corrosion-resistant panel mounts so the salt air doesn’t kill the system in a year. A solar swing gate system for a single gate in Lantana runs $3,500 to $6,500 installed depending on gate weight and panel size. Call (728) 203-0817 for a free assessment.
For a driveway gate post in Lantana, we dig a minimum of 42 inches deep, often 48 inches on canal-front lots, which is deeper than the 36-inch standard inland Palm Beach County. The high water table means the soil around the post stays saturated for weeks after heavy rain, and saturated soil has much less lateral bearing capacity than dry soil. We also use sonotube forms and concrete with a corrosion inhibitor, and we slope the concrete slightly away from the post so standing water drains off rather than pooling at the post base. A post that’s not deep enough will lean within two or three storm seasons, binding the gate and stripping the operator. Call (728) 203-0817 and we’ll check your existing post depths before quoting a replacement.
What Makes Lantana Gate Installation Different
Here’s the part no generic gate company tells you: the single biggest factor in Lantana gate longevity is the first ten minutes after the post hole is dug. If the footing isn’t deep enough or the concrete isn’t mixed for saturated soil, the gate will start binding within a year. If the hardware isn’t stainless, the hinges and keypad contacts will seize within 18 months. If the operator enclosure isn’t sealed for salt mist, the board will fail on a humid July afternoon. We fix those three things on every install, not just on the expensive jobs.
On Marine Drive, our crew replaced a rusted swing gate hinge post and upgraded to a stainless steel rack and pinion slide gate operator with a solar gate opener backup after the original keypad entry corroded and seized. We reset the post footing deeper than code because saturated canal-side soil had shifted the old post, then installed a safety photocell pair and a loop detector so the gate doesn’t fight the wind. That’s what a Lantana-specific gate installation looks like: salt-rated hardware, deeper footings, and automation that works when the power is out and the wind is up.
Every gate comes down to two parts: the latch that holds it and the post that carries it. In Lantana, both fight the same enemy. Salt air attacks the latch and hinge hardware. Saturated soil attacks the post. We build for both. For a free gate installation estimate in Lantana, call (728) 203-0817. We’ll measure, check your soil and post condition, and give you a written price before any work begins. Every installation is backed by the 365-Day Done Right Promise. If it’s not right, we make it right.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Lantana through the Cedarwell family of gate specialists.