Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lantana
Gate repair in Lantana usually runs $150 – $450 for common fixes like hinge replacement or latch adjustment, while full operator swaps on swing gates typically land between $850 and $1,600 depending on the drive system. The salt air near the Intracoastal changes the math here: standard hardware that lasts a decade inland often fails within 18 months on canal-front streets. We stock marine-grade stainless hinges, galvanized posts, and sealed control boards specifically for Lantana’s coastline. Call (728) 203-0817 and a live person answers, day or night.
Why Latch and Post Gate Repair West Palm Beach Is Lantana’s Preferred Gate Repair Company
We’ve worked on enough gates along South Lake Drive and Marine Drive to know what salt spray does to a swing gate that looks fine from the street. Our technicians arrive in uniforms, lay drop cloths before stepping inside, and put on shoe covers without being asked. That matters when kids and pets are running through the house while we work.
Every serviced brand in Lantana, from FAAC to LiftMaster, gets the same treatment: a written price before we start, a cleanup photo before we leave, and the 365-Day Done Right Promise behind the work. If the repair isn’t right, we make it right. No argument, no fine print. Anchored by Cody Beckman, our team treats your gate like it protects our own family.
Our Gate Repair approach starts with understanding what the marine environment is doing to your hardware. Serving Lantana means knowing which streets see the worst corrosion and which parts need upgrading rather than patching.
Styles & brands we work with





Wood Gate Repair in Lantana
Wood Gate Repair in Lantana almost always starts with the hardware, not the lumber. The heat and humidity swell the wood, but it’s the salt-corroded hinges and latch plates that pull screws loose and let the gate sag. A sagging wood gate drags on the driveway, strips hinge screws, and eventually cracks the bottom rail. On canal-front properties we see this happen within 12 to 18 months of a standard hinge install.
Most wood gate repairs in Lantana run $180 – $380 when we’re replacing hinges, reinforcing a sagging corner, and re-hanging the leaf. If the gate frame itself has rot from standing water or hurricane-driven rain, we replace the affected rails and rebuild the joint, which typically adds $150 – $250. You’ll see the exact figure in writing before we touch anything.
Marine-Grade Hardware Replacement
On South Lake Drive and Marine Drive, we won’t install painted steel hinges on a wood gate. We use stainless steel hinges with stainless pins, and we bed them properly so the wood doesn’t wick moisture. This is the difference between a gate that swings true for years and one that seizes again before the next hurricane season.
Sagging and Racking Correction
When a wood gate sags, the fix usually involves a turnbuckle cable or a steel anti-sag kit, plus re-setting the hinges. We choose corrosion-resistant kits with stainless cable and coated brackets. Pets and kids squeeze through gaps that weren’t there six months ago, and this repair closes them back up.
Driveway Gate Repair in Lantana
Our Electric Gate Repair in Lantana covers everything from a sliding gate that shudders on its track to a swing gate opener that hums but won’t move. Salt air attacks the electronics and the steel at the same time, so we often find a mechanical issue and an electrical issue in the same visit. A driveway gate that won’t open isn’t just inconvenient. It traps cars in the driveway and leaves the house exposed.
Basic driveway gate repairs in Lantana run $200 – $500 for limit switch adjustments, track realignment, or hinge replacement. When the operator itself has failed, replacement costs $850 – $1,600 installed, depending on whether you have a FAAC, BFT, Linear, or similar drive. We carry common boards and remotes so we can often finish the repair the same day we diagnose it.
Track and Roller Service
Sliding gates along Lantana’s sandier streets collect grit in the track, and salt sticks to everything. We clean the track, replace worn rollers with sealed bearing units, and adjust the gate so it doesn’t bind. A sliding gate should roll with one hand; if yours takes two, something’s wrong.
Operator Board Diagnostics
When a control board shorts from moisture intrusion, the gate may open but not close, or ignore the remote entirely. We bench-test boards from FAAC, BFT, and Linear and replace them only when they can’t be saved. Sometimes the fix is a sealed enclosure and a new capacitor, not a whole operator.
Trusted Brands We Service in Lantana
Our technicians are factory-trained on FAAC, BFT, and Linear systems, which covers most of the electric gate operators we see in Lantana’s canal-side homes. We stock replacement boards, remotes, safety edges, and hinge kits for these brands locally, so turnaround is faster than waiting on a distributor. When a FAAC board fails from salt intrusion or a Linear actuator quits after a storm, we diagnose the fault on site and give you a written price before ordering anything.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lantana Homes
- Salt-corroded hinge posts on canal-front swing gates. Painted steel posts rust from the inside out within 12 – 18 months near the Intracoastal. The gate sags, the latch misses, and the opener strains until something breaks.
- Moisture and salt intrusion in operator control boxes. Unsealed boxes on South Lake Drive and Marine Drive collect condensation and salt dust. Boards short out, relays stick, and the gate stops responding to remotes.
- Corroded keypad contacts and dead buttons. Exposed keypads near the water develop green corrosion on the contacts. Buttons go dead one at a time, and eventually the whole unit needs replacement with a sealed, marine-rated model.
- Hurricane stress on gates and bracing. Lantana gates take wind load head-on during storm season. Weak posts and loose hinges fail under pressure, and we often find the damage only when we inspect before or after a storm.
Pricing for Gate Repair in Lantana, FL
Gate repair in Lantana runs $150 – $450 for most hinge, latch, and alignment work. Operator replacement runs $850 – $1,600 depending on the drive type and brand. Marine-grade upgrades like stainless hinges or galvanized posts add $120 – $300 to a typical repair but stop the repeat failure cycle on canal-front streets. We write the price before we start work, every time. You’ll know the cost before you say yes, and the price won’t change mid-job. Call (728) 203-0817 for a free estimate; a live person answers around the clock.
We Also Serve Cities Near Lantana
Our Gate Repair team serves Lantana and the surrounding communities, so if you’re in Lantana or nearby, we’re close. We also cover West Palm Beach, Palm Springs, Wellington, and Palm Beach Gardens with the same written-price promise and cleanup routine.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lantana
The salt air near Lantana’s canals and the Intracoastal corrodes standard painted steel hinges and posts within a year or two. Salt spray settles into the hinge barrels, rusts the pins, and loosens the screws that hold the gate to the post. Inland gates don’t face that same exposure. Marine-grade stainless hinges and galvanized posts solve it, and the fix usually costs $180 – $350 for a single swing gate. Call (728) 203-0817 and we’ll give you a written price before we start.
Many boards can be saved if the corrosion hasn’t compromised the traces or the power supply. We bench-test FAAC, BFT, and Linear boards in the truck and replace only what’s actually dead. A board replacement runs $300 – $600, while a full operator replacement runs $850 – $1,600, so it’s worth checking the board first. Call (728) 203-0817 and we’ll diagnose it on site.
Powder coating over properly prepared steel lasts longest near salt water, but it’s only as good as the prep. We recommend galvanized steel as the base, then powder coat on top. On a South Lake Drive gate we recently replaced painted steel posts with galvanized steel and stainless pins, then added a marine-grade coating to the rack and pinion drive. That combination typically lasts 5 – 7 years before the first signs of surface rust, versus 18 months for standard painted steel.
We recommend an inspection every spring, before hurricane season starts. The inspection covers hinge pins, post anchors, bracing, limit switches, battery backup, and keypad function. Most inspections in Lantana run $95 – $150, and we’ll give you a written list of what needs attention before any repair work begins. Call (728) 203-0817 to schedule yours.
Unsealed keypad housings collect salt mist and condensation from the ocean air, corroding the contacts behind the buttons. The fix is a sealed, marine-rated keypad with conformal-coated electronics. Replacement runs $180 – $300 installed. It’s one of the most common calls we get on Marine Drive, and the sealed unit is what finally stops the repeat failures.
If your gate is sagging, stuck, or refusing to respond, call (728) 203-0817 now. A live person answers 24/7, and we’ll give you a free estimate with a written price before any work starts. Latch and Post Gate Repair West Palm Beach serves Lantana with the same care we’d give our own homes: shoe covers, drop cloths, a cleanup photo, and a 365-day promise that the job is done right.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Lantana since 2009.