Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Riviera Beach
Gate installation in Riviera Beach comes with a different set of rules than most of Palm Beach County. The salt spray off the Atlantic and Lake Worth Lagoon eats through standard hardware in a matter of years, which means the hinge you buy matters as much as the gate itself. We’ve been installing gates here long enough to know exactly which components fail first and which specifications actually hold up. If you’re planning a new driveway gate, pedestrian gate, or full automatic system for a home near the Intracoastal or in one of the older neighborhoods off Blue Heron Boulevard, call us at (728) 203-0817 for a written estimate before any work starts.
Why Latch and Post Gate Repair West Palm Beach Is Riviera Beach’s Preferred Gate Installation Company
Riviera Beach homeowners call us because we show up knowing what this specific coastal environment does to metal. Our technicians are trained on the brands families actually own here, including Viking, DoorKing, and Ghost Controls, and they understand that a gate near the marina on the Intracoastal needs different fasteners than a gate in Palm Beach Gardens. We carry marine-grade stainless hardware and galvanized frames on our trucks, because standard zinc-plated parts simply don’t survive the salt air here. Every job comes with a written price before we start, shoe covers and drop cloths if we step inside, and a photo of the clean-up before we leave.
Cody Beckman leads our team, and he’s built the company around a simple idea: every gate comes down to two parts, the latch that holds it and the post that carries it. We focus on those two things and everything that connects them. When a Riviera Beach customer calls with a gate that’s sagging or an operator that’s dead after a storm, we respond with the same calm, specific approach every time. We answer the phone with a live person, 24 hours a day, and we’ll tell you exactly what we think before we ever schedule the visit.
Styles & brands we work with
Gate Fabrication in Riviera Beach
Gate Fabrication in Riviera Beach means building a gate from scratch for a specific opening, a specific wind load, and a specific salt-air exposure. Not every gate can be ordered from a catalog. When a homeowner near the port or off PGA Boulevard needs a driveway gate sized to a custom opening, or a pedestrian gate that matches an existing wrought-iron fence, we fabricate the frame in galvanized steel and finish it with marine-grade coatings so it doesn’t start rusting within two years. A typical custom gate fabrication in Riviera Beach runs $1,800 to $4,500 depending on the size, material, and whether we’re also fabricating a matching pedestrian gate alongside the driveway gate.
Marine-Grade Steel and Stainless Hardware
In Riviera Beach, the difference between a gate that lasts and a gate that rots from the inside comes down to fasteners and frame treatment. We specify stainless steel hinges, stainless bolts, and hot-dipped galvanized frames on every fabrication job here, even when a customer might technically ask for a cheaper painted steel option. The cost difference is usually a few hundred dollars. Replacing a rusted gate in five years costs thousands.
Custom Sizing for Older Riviera Beach Openings
Many Riviera Beach homes built in the 1950s through 1970s have non-standard gate openings. The concrete-block construction holds up beautifully, but the original gate framing was often welded on-site and never meant to carry an automatic opener. Fabricating a new gate lets us size the frame correctly and add the reinforcement points an operator will need later, rather than retrofitting around someone else’s measurements.
Automatic Gate Installation in Riviera Beach
Automatic Gate Installation in Riviera Beach involves more than mounting an opener on a post. The salt air, frequent summer lightning, and hurricane-season winds mean the control board, wiring, and grounding all have to be specified differently here than inland. A typical automatic gate installation in Riviera Beach runs $2,500 to $6,500 for a single swing or slide gate, including the operator, safety photocells, and a surge protector on the circuit. We also recommend a galvanized frame and stainless hardware, which we include when we’re installing both the gate and the automation. The quote you receive will list every component and the exact price before any work begins.
Surge Protection for Lightning-Prone Areas
Riviera Beach sits right in the path of the afternoon thunderstorms that build over the Gulf Stream each summer. A direct lightning strike doesn’t have to hit your gate to fry the operator’s control board; a nearby strike can send a surge through the power line and kill a board that was working perfectly five minutes earlier. We install a dedicated surge protector on every automatic gate we automate here, and we’ll talk with you about whether a battery backup makes sense for your property.
Wind Load and Footing Depth
Automatic gates in Riviera Beach have to handle hurricane-force gusts coming off the water. That means footings poured deeper than code minimums, hinge posts set in concrete with rebar, and frames engineered so the gate won’t flex and bind in high wind. Our crews have installed gates on waterfront properties along the Intracoastal where the wind constantly works the hinges, and we’ve learned what holds.
Trusted Brands We Service in Riviera Beach
We’re factory-trained on the operators Riviera Beach homeowners actually have: Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Because we work on these brands every day, we keep common control boards, safety edges, and remotes stocked locally, which means we don’t have to order parts and wait a week. That matters on a coastal property where a gate stuck open isn’t just inconvenient, it’s an open invitation. If you already own a Viking or DoorKing system and need a repair or replacement part as part of your installation, we’ll match the right component to the existing setup.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Riviera Beach Homes
After years of installing gates in Riviera Beach, these are the failures we see most often:
- Corroded hinge posts at the base. Salt spray accumulates where the post meets the concrete footing, and within five to seven years the steel rusts through, causing the gate to sag and eventually snap. Stainless or galvanized posts with a sealed base are the only fix that lasts here.
- Failed circuit boards from lightning. Older neighborhoods near Blue Heron Boulevard still have original 1980s circuit boards in automatic gate operators. One summer storm with close lightning and the board shorts, leaving the gate stuck wherever it is.
- Binding slide-gate tracks from sand and salt. Slide gates along the Intracoastal pick up fine sand that mixes with salt spray and grinds the track and rack-and-pinion system. Without marine-grade lubrication and regular track cleaning, manual operation becomes nearly impossible.
- Sagging gates from undersized footings. Many original gates in Riviera Beach were installed with shallow footings that work fine inland but shift in the soft, sandy soil near the water. We pour deeper, wider footings with rebar on every new installation.
Pricing for Gate Installation in Riviera Beach, FL
Here’s what we charge in Riviera Beach as of 2025. A standard single swing driveway gate with a manual latch typically runs $1,500 to $3,000 installed. A double swing gate runs $2,800 to $5,500. A sliding gate, which many Riviera Beach homeowners prefer because it takes less driveway space, runs $3,000 to $6,000. Automatic openers add $900 to $2,200 for a quality unit from Viking, DoorKing, Ghost Controls, or Elite, including installation, wiring, and surge protection. Custom gate fabrication, which means building from scratch with galvanized steel and stainless hardware, runs $1,800 to $4,500 as a standalone, or more when paired with an automatic system. The total price depends on your gate width, whether we need to pour a new footing, and whether the existing post can be reused. Every quote is written, itemized, and agreed to before we touch anything. Call (728) 203-0817 and we’ll walk through your options.
We Also Serve Cities Near Riviera Beach
Our crews work throughout the Riviera Beach area daily. Along with Riviera Beach, we install and service gates in West Palm Beach, Palm Springs, Wellington, and Palm Beach Gardens. If you’re just outside the city limits, we’ll still come out, measure, and give you the same written price. And because we’re part of the Cedarwell family of independently owned gate specialists, the standard of care we bring to your home is the same every time.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Riviera Beach
Yes. A waterfront property on the Intracoastal in Riviera Beach requires stainless steel fasteners, a galvanized or powder-coated marine-grade frame, and surge protection on the operator, because the salt spray blows directly off the water and corrodes standard zinc hardware within a few years. We specify all three on every waterfront installation we do here.
A gate that sags within a year in Riviera Beach almost always has a hinge post that wasn’t set deep enough in concrete, or hardware that’s already rusting at the base from salt spray. We pour deeper, rebar-reinforced footings and use stainless hinges that won’t corrode. Call (728) 203-0817 and we’ll inspect what’s failing and give you a written price to fix it properly.
Choose a circuit board with built-in surge protection, and add a dedicated surge suppressor on the power line feeding the operator. In Riviera Beach’s lightning-heavy summers, a board with surge protection is not optional; it’s the difference between a gate that opens after the storm and one that’s dead. We install surge protectors as standard on every automatic gate we automate here.
Yes. Gated communities near PGA Boulevard and the port typically require safety photocells, a reversing edge or safety edge on the gate, and sometimes a keypad or telephone entry system that meets the HOA’s access-control rules. We handle the safety equipment on every automatic installation and can coordinate with your community’s property manager on access requirements.
A solar gate opener can survive in Riviera Beach, but only if the panel is mounted with stainless hardware and the battery is protected from salt corrosion and heat. Solar systems work best on gates that get full sun, which most Riviera Beach driveways do. We stock solar-compatible operators from Ghost Controls and Mighty Mule, and we’ll tell you honestly if your site is a good candidate. Call (728) 203-0817 for an exact recommendation.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Riviera Beach and surrounding communities.