Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Lake Worth
A new driveway gate in Lake Worth typically runs $1,800 to $4,200 for a single swing gate, and $3,500 to $8,500 for a sliding or double gate, depending on width, material, and whether you’re adding an automatic opener. Most installations in Lake Worth take one to two days once the gate is fabricated, though custom wrought-iron work can add a week.
If you live off North Lakeside Drive, in the historic downtown grid, or out near John Prince Park, you know the lots here aren’t like the sprawling subdivisions further west. We work on those old 25-foot-wide lots every week: gates and posts placed where a swing arc clears the property line, operators wired where salt air won’t eat them in eighteen months, and neighbors’ driveways kept open the whole time. Call (728) 203-0817 and we’ll bring a written price to your door before anything gets bolted down.
Key Takeaways
- Most Lake Worth gate installations run $1,800 to $8,500, with a written price agreed before work starts.
- Coastal salt air dictates hardware choices: marine-grade track, stainless hinges, corrosion-rated operators.
- Narrow 25-foot lots and shared driveways mean operator placement matters more here than almost anywhere else in Palm Beach County.
- We install, automate, and fabricate gates our own crews build, including custom hinges and latches for pre-war wrought iron.
Why Latch and Post Gate Repair West Palm Beach Is Lake Worth’s Preferred Gate Installation Company
We’ve been building and hanging gates since 2009 as part of the Cedarwell family of independently owned gate specialists, and Lake Worth has always been core territory for us. The houses here reward someone who knows the difference between a 1925 cottage on a tight lot and a mid-century ranch with a wide apron but a shallow setback. Cody Beckman runs our team with one rule that shows up on every job: the price is written down before we start, and the driveway looks better when we leave than when we arrived.
Lake Worth homeowners tell us the same things after every install. The crew wore shoe covers inside the house. The drop cloths went down before the post hole was dug. The cleanup photo showed up before the truck pulled away. That’s the Cedarwell C.A.R.E. routine, and it is not an add-on. It’s how every visit works.
You will not get a voicemail queue when you call us. A live person answers at 2 a.m. and at 2 p.m., holidays included. If you are in Lake Worth and your gate won’t open at 6 a.m. before work, someone picks up and starts figuring it out with you.
Styles & brands we work with
Gate Fabrication in Lake Worth
Gate fabrication in Lake Worth often means building a gate to fit a space no catalog gate will fit. In the historic downtown neighborhoods, many of the original wrought-iron gates from the 1920s and 1930s are still swinging, and when the hinges or latches finally go, we custom-fabricate replacements that match the old scrollwork and bar spacing rather than bolting on a modern hinge that looks wrong against a 100-year-old design.
Typical custom fabrication in Lake Worth runs $600 to $1,800 for a single pedestrian or driveway gate, plus the concrete and post work if the original footing has rotted through. For a 10-foot driveway opening, a custom steel gate with a powder-coated finish runs roughly $900 to $2,200 depending on ornamentation.
Custom Hinges and Latches for Older Gates
When we pull a rusted gate off a 1920s cottage on North Lakeside Drive, we often find the hinge pin has been worked over for decades. We build a replacement hinge in the shop to carry the same weight and swing, and we re-drill the post to take it. You keep the original gate; we replace only what’s dead.
Matching Wrought Iron Work
Lake Worth’s historic downtown still has wrought-iron gates with fleur-de-lis tips and curved top rails. We can match-bar for bar, weld the new sections in, and paint to match. This is not a repair a big-box installer will touch.
Automatic Gate Installation in Lake Worth
Automatic gate installation in Lake Worth involves more than hanging a motor on a post. You need a properly poured footing below the water table, wiring rated for outdoor coastal exposure, a photocell or edge sensor placed where it will not trip on a neighbor’s car, and an operator sized for the gate’s weight and the humidity it will live in.
A full automatic gate installation on a new or existing gate in Lake Worth generally runs $2,400 to $5,500, including the operator, safety edges or photocells, wiring from the house, and programming. For a sliding gate with a marine-grade track and a FAAC or LiftMaster operator, expect $4,000 to $8,500.
Operator Placement on Narrow Lots
On a 25-foot-wide lot, a swing gate operator needs a clear arc that does not cross the property line or a shared curb cut. We measure the setback and the swing path before we quote anything. If the swing will not clear, we’ll recommend a sliding gate spec with a compact rack-and-pinion operator that hugs the post.
Coastal-Grade Wiring and Controls
Salt air kills standard control boards fast. We use sealed enclosures, corrosion-rated connectors, and operator models with conformal-coated circuit boards. A LiftMaster LA400 or FAAC 400 with a sealed housing will outlast a big-box opener by years in Lake Worth’s climate.
Trusted Brands We Service in Lake Worth
Our technicians are trained on the operators Lake Worth homeowners actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock replacement arms, hinges, rails, and control boards for LiftMaster and FAAC units locally, which means a faster turnaround when a salt-corroded terminal or a failed limit switch needs replacing. If you have a Mighty Mule opener on a pedestrian gate near Lake Worth Golf Club, or an Elite slide gate operator on a property off Lake Osborne Drive, we can service it right where it sits.
Common Gate Installation Problems We See in Lake Worth Homes
- Swing gates sweeping across a shared driveway or right of way. Lake Worth’s pre-1940s plat placed 25-foot lots side by side with shared curb cuts, so a gate that swings into a neighbor’s path violates the setback. We re-set hinges and operator arms so the arc stays on your side.
- Standard galvanized slide tracks pitting within a year. Coastal salt air eats a standard track’s zinc coating quickly, causing the rack to bind and the operator to overload. We spec marine-grade stainless or aluminum track on every slide gate install near the Intracoastal.
- Shallow post footings shifting after the first heavy rain. Lake Worth’s high water table saturates sandy soil fast. A two-foot footing moves. We pour deeper, wider footings with proper rebar and drainage so the post stays put through the wet season.
- Sun-baked plastic parts and control boards failing early. The August sun degrades plastic limit cams and housing covers. We use models with metal gears and sealed boards, and we mount controls out of direct afternoon sun where the layout allows.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Lake Worth, FL
These are real ranges, not guesses. Your written quote is based on the gate’s width, the condition of the existing posts, the type of operator, and whether we’re working around a shared right of way. The price you see is the price you pay. We put it in writing before any work starts. Call (728) 203-0817 for a free estimate; no deposit, no pressure, no surprise line items.
We Also Serve Cities Near Lake Worth
Our gate installation crews cover Lake Worth and the surrounding South Florida area, including Wellington, Royal Palm Beach, West Palm Beach, and Palm Beach. If you’re a few minutes down the road and have a gate question, we’ll come out the same way we do for our Lake Worth customers: with a written price and a clean worksite.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lake Worth
Yes, if the gate is built and hung to stay inside your property line. On the 25-foot-wide lots common in Lake Worth’s older plats, a 10-foot driveway leaves about 7 to 8 feet of gate arc on each side if centered. We can install a single swing gate with the operator set back far enough that the leaf never crosses the side lot line. If the swing arc won’t clear, we’ll quote you a sliding gate instead. Call (728) 203-0817 and we’ll measure it on site for free.
No, you usually need a new post footing, not a whole gate. We remove the rusted post, pour a deeper footing with rebar and a drainage channel, and set a new post rated for coastal exposure. If the gate’s hinges are similarly corroded, we custom-fabricate matching replacements. We only replace the gate itself if the frame is structurally gone. Call (728) 203-0817 and we’ll tell you honestly which it is.
We stage the job around the shared right of way and never block it for more than a few minutes at a time. On a North Lakeside Drive cottage with a shared curb cut, our crew set up on the customer’s side, kept the neighbor’s car access clear through the whole two-day install, and swept the shared driveway each evening. We coordinate with both neighbors up front and put the schedule in writing.
Every automatic gate operator installed in Lake Worth must include UL 325-compliant entrapment protection, which means either continuously monitored photocells across the gate opening or monitored contact edges on the leading and trailing edges of the gate. We install both on most residential gates so a child or pet in the path trips the sensor before the gate touches them. We test the reversing force and log the settings for every install. Call (728) 203-0817 if your existing operator is missing either.
Yes, but the panel placement makes or breaks the system. Tall hedges along Lake Worth’s mid-century ranch lots shade the panel for most of the afternoon, which undercharges the battery and causes the gate to fail by evening. We mount the panel on a short pole above the hedge line or relocate it to the roof edge, always angled south. A properly placed 20-watt Mighty Mule or Ghost Controls panel keeps a single gate running through storm season. Call (728) 203-0817 for a panel placement check.
Get Your Lake Worth Gate Installed Right
The salt air, the tight lots, the shared driveways – that’s Lake Worth, and we’ve learned how to work in all of it. Cody Beckman and our team will come out, measure your opening, hand you a written price, and if you accept, we’ll start when your schedule allows. Floors stay clean, the price stays put, and the gate works the same in August humidity as it does in February.
Call (728) 203-0817 for a free estimate on gate installation in Lake Worth.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Lake Worth since 2009.