Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in West Palm Beach?
Gate access control installation in West Palm Beach typically costs between $2,800 and $8,500 for a complete system, with most homeowners spending around $4,500 for a single driveway gate with keypad and intercom. A standalone keypad or card reader upgrade on an existing gate usually runs $450 to $1,800. These are real numbers from the West Palm Beach market in 2026, and the exact figure you’ll pay depends on your gate type, the equipment brand, and how much wiring already exists.
At Latch and Post Gate Repair West Palm Beach, we write your price down before any work begins. You’ll know the full cost, line by line, before our technician touches a screwdriver. Call (728) 203-0817 for a free estimate specific to your property.
Gate Access Control Cost Breakdown (2026)
Here’s what our technicians see across West Palm Beach neighborhoods, from El Cid to Palm Beach Lakes, when quoting access control work. The table below gives you realistic ranges for the most common configurations we install and service.
| Component or Service | Typical Cost Range | Notes |
|---|---|---|
| Keypad entry system (standalone) | $450 – $1,200 | Includes weatherproof housing; common on pedestrian gates |
| Telephone entry / intercom system | $1,800 – $4,500 | Multi-line systems for larger properties run higher |
| Card reader or fob system | $650 – $2,200 | Per reader; includes mounting and programming |
| Complete access control package (gate + opener + keypad + intercom) | $2,800 – $8,500 | Most common full-system range in West Palm Beach |
| Vehicle loop detector (buried sensor) | $500 – $1,400 | Needs cutting into driveway asphalt or concrete |
| Smartphone / app-based control add-on | $300 – $900 | Works with LiftMaster, DoorKing, and Ghost Controls openers |
| Existing gate opener repair (no new access control) | $180 – $650 | Common issues: failed capacitor, stripped gear, misaligned limit switch |
| Wiring repair or replacement | $250 – $1,800 | Depends on conduit distance and whether trenching is needed |
What drives the price up or down? Three things mostly. First, whether your gate already has low-voltage wire run to it. Homes in newer West Palm Beach developments often do. Older homes in neighborhoods like Flamingo Park or Southland Park may need fresh conduit, which adds labor and material. Second, the brand you choose. A basic Mighty Mule keypad is cheaper than a FAAC or BFT touchscreen entry system, and the difference shows in long-term reliability. Third, whether you have a swing gate or a slide gate. Slide gates need a longer run of wire and sometimes a second loop detector, which adds $500 to $1,000 to most quotes.
What Affects Gate Access Control Pricing in West Palm Beach
- Gate type. Swing gates cost less to outfit because the opener and wiring sit close to the hinge post. Slide gates run along a track, which means longer conduit runs and typically a vehicle loop detector on both sides of the gate. Expect slide gate access control to run 15% to 30% higher than swing gate work.
- Distance from the house to the gate. In West Palm Beach, a lot of properties have the gate set back from the street or offset from the main structure. The farther the gate is from your electrical panel, the more low-voltage wire we need to pull. A 40-foot run is standard; a 150-foot run through mature landscaping can add $400 to $900.
- Salt air and coastal exposure. Homes west of I-95 get normal wear. Homes near the Intracoastal or along Flagler Drive deal with salt spray, which corrodes circuit boards, keypad contacts, and wiring harnesses faster. We install marine-rated enclosures and sealed connectors on coastal jobs, and that adds $150 to $500 over standard components. It is the difference between a system that lasts five years and one that lasts ten here.
- Brand and equipment tier. LiftMaster and DoorKing keypads are solid mid-range choices. FAAC and BFT are the premium hydraulic brands you’ll see on heavier estate gates. Ghost Controls is a newer option that works well for DIY-friendly retrofit jobs, though we handle the wiring and programming. Brand choice typically swings the quote by $200 to $1,200 per component.
- Access control features. A simple keypad is one thing. A system with video intercom, smartphone app access, time-based codes for a housekeeper or pool service, and vehicle detection is another. Each added feature adds $200 to $800. Most West Palm Beach families settle on keypad plus intercom plus one vehicle loop.
- Condition of the existing gate hardware. If the gate itself is sagging or the hinges are worn, we may need to address that before mounting new access control equipment. A misaligned gate will chew through openers and pull wiring loose. Gate post or hinge repair adds $150 to $600, and it is money well spent.
How to Save on Gate Access Control
The most common way people overspend is by adding features they won’t use after the first month. Truthfully, most West Palm Beach homes need three things: a keypad or card reader for family entry, an intercom or telephone entry for guests, and a vehicle loop so the gate opens automatically when you pull up. Everything beyond that is convenience. Start there, and add extras later if you want them.
Second, handle wiring while you’re having other landscape or hardscape work done. If you’re already trenching for irrigation or landscape lighting, pulling low-voltage wire to the gate in the same trench saves hours of labor. Coordinate with your contractor or let us work alongside them. We do this often in neighborhoods like Lake Clarke Shores and Westgate, where irrigation projects and gate work overlap seasonally.
Third, don’t skip the vehicle loop detector. It costs $500 to $1,400, but it prevents the most common failure we see: the gate closing on a car because the safety sensor was shadowed by the hot afternoon sun reflecting off a West Palm Beach driveway. Loop detectors are buried in the asphalt and read the metal mass of your vehicle, which is far more reliable than photocell beams in our climate.
Fourth, get a written quote before any work starts. Our technicians bring shoe covers and drop cloths on every visit, and you’ll see the full price in writing before we begin. If the written number matters to you, call (728) 203-0817 and we’ll send someone out to measure and quote for free.
Gate Access Control Installation: What to Expect
When a Latch and Post technician arrives at your West Palm Beach home, here is the routine. First, we walk the property with you and confirm what you want the system to do. We’ll ask who needs access: family members, a dog walker, a pool guy, a landscaper. That determines whether you need multiple codes, a card, a fob, or a phone app. Then we measure the gate, check the existing opener and wiring, and write your price. No work starts until you approve the number.
- Site walk and system design. We check gate travel, hinge condition, power access, and conduit paths. If there’s existing access control, we test it while you watch.
- Written quote. You receive a line-item price for equipment, wire, labor, and any repairs the gate needs. You decide what moves forward.
- Installation day. Our technician lays drop cloths on any interior floors we walk through and puts on shoe covers before stepping inside. If your kids are napping or you’re on a call, we use quiet tools and keep the gate chime off while programming.
- Programming and testing. We program your codes, cards, or app, then test every function at least three times: entry, exit, safety reversal, and manual release. You’ll see it work before we call the job done.
- Cleanup and photo. We clean the work area, put things back where we found them, and take a photo of the finished cleanup before we leave. It is part of the Cedarwell C.A.R.E. routine: Clean up like it is our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work.
Important safety note: Gate access control systems are wired into your gate opener, which is a high-tension mechanical system. Springs, cables, and opener gears can hold significant force, and a gate that closes unexpectedly can injure a person or pet. We do not recommend opening the opener housing or adjusting gate travel on your own. If your gate is making a grinding noise, creeping out of alignment, or reversing unexpectedly, call a trained technician rather than opening the unit yourself.
How Much Does Gate Access Control Cost in West Palm Beach? (By Project)
People ask this question in a few different ways depending on what they’re actually trying to do. Here are the real project scenarios we quote in West Palm Beach:
Adding a keypad to an existing gate opener
If you already have a functioning LiftMaster, DoorKing, or FAAC opener and you just want keypad entry, you’re looking at $450 to $1,200 installed. The keypad itself runs $120 to $400 depending on brand; the rest is labor, weatherproofing, and programming. This is the most common job we do in West Palm Beach, especially for homeowners who just moved in and want to stop handing out physical remotes.
Replacing a broken telephone entry system
Telephone entry systems at the gate, the kind that call your cell phone when a visitor presses the button, run $1,800 to $4,500 installed. The bigger variable is whether the old system’s wire is still usable. If water got into the pedestal, which happens often with coastal salt air, we may need to pull new wire. Budget $2,500 to $4,000 for a typical replacement with a DoorKing or BFT unit in West Palm Beach.
Full access control on a new gate installation
If you’re doing a complete Gate Access Control in West Palm Beach project with a new gate, opener, keypad, and intercom, the realistic range is $3,500 to $9,500. The gate itself, whether aluminum, steel, or wood, is the largest variable. A basic aluminum swing gate with a LiftMaster opener and keypad sits near the low end. A custom steel slide gate with FAAC hydraulics, video intercom, and two vehicle loops lands near the top.
Vehicle loop detector installation
On its own, a vehicle loop detector costs $500 to $1,400. The loop wire gets saw-cut into your driveway in a rectangular pattern, then sealed. Expect a little dust and a visible seam in the asphalt or concrete. On pavers, the loop goes underneath and we re-set the pavers after. In West Palm Beach, this is a year-round job; heat softens the sealant in summer, but it cures fine.
West Palm Beach Specifics: What Local Conditions Mean for Your Gate System
West Palm Beach is not the same as Orlando or Miami when it comes to gate work. The summer rain pattern here is intense, with daily downpours from June through September that dump inches of water in an hour. Gate keypads and intercoms need weather-sealed enclosures, and circuit boards need conformal coating to survive the humidity. We spec enclosures rated for direct rain exposure on every outdoor install, not just the ones within sight of the water.
The second local factor is the salt air, already mentioned, but it is worth repeating for neighborhoods east of Olive Avenue. Salt corrosion is the number one reason we replace access control boards in homes along the Intracoastal. A standard keypad may last seven years inland and three years near the water. Marine-rated stainless enclosures and sealed connectors cost more up front and save repeated service calls later.
The third factor is soil. West Palm Beach sits on a mix of sand and organic muck, and gate posts settle over time, especially swing gate hinge posts. When a post shifts even half an inch, the gate binds, the opener strains, and the access control safety sensors misread. Part of our access control quote always includes checking the post and hinge condition. In neighborhoods like Southland Park where oak roots are thick, we sometimes recommend a post reinforcement before we mount new equipment. Every gate comes down to two parts, the latch that holds it and the post that carries it. That is the job we focus on.
Key Takeaways
- Realistic budget for a full access control system in West Palm Beach: $2,800 to $8,500. Most families land around $4,500.
- Keypad-only addition: $450 to $1,200. This is the fastest, cheapest access control upgrade.
- Vehicle loop detectors add $500 to $1,400 and drastically reduce gate-on-car accidents.
- Coastal homes need marine-rated enclosures. Add $150 to $500 for corrosion-resistant gear east of I-95.
- Our written quote is free and comes before any work starts. Call (728) 203-0817 to schedule.
FAQs – Gate Access Control Cost
How much does a gate keypad cost in West Palm Beach?
A gate keypad in West Palm Beach costs $450 to $1,200 installed on an existing opener. The keypad hardware itself is $120 to $400, with the rest going to weather-sealed mounting, wiring, and programming. Call (728) 203-0817 for an exact quote, because the number changes with your opener’s brand and age.
Is it cheaper to repair or replace a gate opener?
Repairing a gate opener costs $180 to $650 in most cases, while replacing it runs $800 to $2,500 depending on brand and horsepower. If the opener is more than 12 years old and the control board has failed, replacement usually makes more sense. We’ll tell you straight which one is right, and you’ll see the written price before we do anything.
How much does a telephone entry system cost in West Palm Beach?
A telephone entry system for a West Palm Beach gate costs $1,800 to $4,500 installed. Systems that call your cell phone and let you buzz visitors in remotely sit at the higher end. The final number depends on whether the existing pedestal and wiring can be reused.
Can you install gate access control the same day?
Yes, in many cases. If your gate already has an opener with usable wiring, we can often install a keypad or card reader the same day we quote it. Complete systems with trenching and new wire typically take one to two days. Call (728) 203-0817 in the morning and we’ll tell you what’s possible for your specific gate.
How much does it cost to add a gate remote control?
Adding a remote control receiver to a gate opener costs $150 to $450 including the receiver and programming. Replacement remotes for LiftMaster, DoorKing, FAAC, and Ghost Controls openers run $40 to $120 each. If your opener predates rolling-code technology, we may recommend upgrading the receiver for security, and we’ll show you that number in writing before starting.
Do you give free estimates for gate access control in West Palm Beach?
Yes. Every estimate from Latch and Post Gate Repair West Palm Beach is free, and every quote is written down before work begins. There is a live person answering calls 24 hours a day, so you’ll reach a human at (728) 203-0817 whenever you call, nights, weekends, and holidays included.
Ready for a Straight Answer on Your Gate Access Control Price?
You’ve seen the ranges. What you haven’t seen is how those numbers apply to your gate, your opener, and your property. That takes a site visit and a tape measure, and both are free. Our technicians are background-checked, uniformed, and factory-trained on the brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we come to your West Palm Beach home, we’ll put on shoe covers before stepping inside, lay drop cloths on any floor we walk, and show you the cleanup photo before we leave. That is the Cedarwell C.A.R.E. standard on every job, no exceptions.
Every repair and installation is covered by the 365-Day Done Right Promise. If it is not done right, we make it right. No argument, no fine print. Call (728) 203-0817 and a live person will answer. You’ll get a written price before any work begins, and you can decide from there with no pressure. For more on our home service area or to schedule an estimate, reach out today.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving West Palm Beach families since 2009.
Pricing reflects the West Palm Beach market as of 2026. Latch and Post Gate Repair West Palm Beach offers free estimates – call (728) 203-0817.
What Our Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague