Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Westgate
Electric gate repair in Westgate usually comes down to one of three things: a builder-grade operator that’s given up after decades of salt air, a track that’s lost its footing in sandy soil, or a conduit run that should have been put in during the build and never was. We’re Latch and Post Gate Repair West Palm Beach, and our crews service Westgate homes every week. If your gate won’t open, grinds when it does, or jumps the track after an afternoon storm, call (728) 203-0817 and a live person answers. We’ll give you a straight answer and a written price before any work starts.
Why Latch and Post Gate Repair West Palm Beach Is Westgate’s Preferred Electric Gate Repair Company
Our Electric Gate Repair team knows the difference between a Westgate home built in 1988 and one built last year, because the failure patterns are completely different. The older stock, stucco single-story homes on small lots that dominate Westgate, came with aluminum slide gates and builder-grade operators that were never meant to run this long in a humid subtropical climate. We see the same problems repeat across the neighborhood: stripped plastic gears, corroded motor housings, and track beds that wash out under sandy soil.
Every technician who arrives at a Westgate home is background-checked and uniformed, trained on FAAC, BFT, Linear, and Viking equipment, and follows the Cedarwell C.A.R.E. routine. That means shoe covers and drop cloths before we step inside, quiet tools when kids are napping, and a photo of the cleanup before we leave. We ask before we move anything. We explain the price before we touch anything. Cody Beckman, who leads our team, holds every job to the 365-Day Done Right Promise: if the repair isn’t right, we make it right, no argument.
Styles & brands we work with
Gate Access Control in Westgate
Gate access control in Westgate means giving your family and visitors a way in that doesn’t involve getting out of the car or handing out keys that never come back. Most Westgate homes we visit have a simple keypad or remote, but the original builder-grade units from the 1980s and 90s are reaching the end of their service life. A new keypad, paired to a working operator, typically runs $280 to $520 installed for Gate Installation - Westgate. A full access control upgrade with two remotes, a keypad, and a receiver usually lands between $550 to $900.
Keypad and receiver upgrades
When a keypad stops accepting codes after years of sun exposure, the fix is usually a new membrane and a receiver reprogram, not a whole-system replacement. In Westgate, we stock common FAAC and Linear keypad parts so we don’t have to make you wait on a shipment.
Adding access without new conduit
Many Westgate homes never had low-voltage conduit run to the gate at build. We can add wireless access control using a solar-charged battery bank, so you’re not trenching through a lawn or cutting stucco. It’s not as cheap as swapping a keypad, but it’s far less invasive, and we’ll show you the written number before any work begins.
Commercial Gate Operator in Westgate
A commercial gate operator in Westgate faces different demands than a residential one: longer run cycles, heavier panels, and exposure to the same salt air and afternoon storms that wreck residential hardware. We service operators on small commercial properties throughout Westgate, including offices and storage facilities along the main corridors. A replacement commercial slide operator, with new safety edges and a control board, typically runs $2,800 to $4,600 installed in this market. A repair to an existing commercial unit, like a failed limit switch or a capacitor, runs more in the $350 to $750 range.
Operator replacement vs. rebuild
When a commercial operator has failed, we look at the whole picture before quoting a replacement: the age of the gate panel, the condition of the track, and whether the control board is worth saving. Sometimes a rebuild, new bearings, new gear, fresh lubricant, gets another five years for a quarter of the cost. We’ll tell you honestly which one makes sense, and you’ll see the number in writing before you decide.
Storm-hardening commercial gates
Commercial gates in Westgate often sit on exposed concrete where wind gusts during tropical storms whip the panel against the stops. We check and adjust the close force, replace worn wheels, and re-anchor any post that’s showing movement. It’s cheaper than a gate that rips off its hinges in a storm.
Trusted Brands We Service in Westgate
We work on the equipment Westgate homeowners actually own. That includes FAAC slide operators, BFT control boards, Linear receivers and remotes, and Viking swing-arm operators. Our crews are factory-trained on these brands, which means the diagnosis happens once and the correct part goes in the same day when we have it on the truck. For Westgate’s older installations, we keep common FAAC and Linear parts in local stock so a ten-minute repair doesn’t become a week-long wait.
Common Electric Gate Repair Problems We See in Westgate Homes
- Gate jumps the track after rain. Westgate’s sandy soil erodes under the concrete track after a heavy afternoon thunderstorm, and the gate derails. We dig back behind the track bed, set a cement re-support, and re-square the rack so the gate rides clean even after a downpour.
- Builder-grade operator runs but won’t move the gate. The motor is fine, but the plastic gears inside a 1990s operator have stripped after years of salt-air corrosion on the housing. We replace the gear set or the operator, not both, unless both are done.
- Gate sags and drags, stalling the operator. On older aluminum slide gates in Westgate, the hinge post footing corrodes in the humid soil and the panel tips forward. We re-anchor or replace that post before we touch the operator, because a new operator on a sagging gate will fail the same way.
- Surface-mounted conduit shorts out in storms. Homes that added automation later often have low-voltage wiring run along the outside of a stucco wall. Wind rubs the conduit against the rough surface, the insulation wears through, and the gate stops during the exact storm that should be keeping the yard secure. We re-route or replace that run properly.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Westgate, FL
You should know what things cost before you call. A service call to diagnose an electric gate problem in Westgate runs $89 to $140, depending on where the home sits and what we find. Common repairs run from $180 for a receiver reprogram or safety sensor realignment, up to $520 for a control board replacement, and $850 to $1,400 for a full residential operator replacement on a slide gate. Commercial operator replacement starts higher, typically $2,800 to $4,600 depending on the gate weight and access requirements. Every price is written and agreed before we start, and the estimate is free. Call (728) 203-0817 with the brand and what the gate is doing, and we’ll give you a realistic range before we even schedule.
We Also Serve Cities Near Westgate
Our Electric Gate Repair crews handle calls across Westgate and the surrounding communities, including West Palm Beach, Palm Springs, Wellington, and Palm Beach Gardens. If your gate is failing and you’re deciding whether to repair or replace, call (728) 203-0817 and we’ll help you think it through.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Westgate
The problem is almost always the soil, not the operator. In Westgate, the sandy ground under the concrete track washes out during heavy rain, the track shifts, and the gate wheels lose their groove. We dig back behind the track bed, set a new cement re-support, and re-square the rack and pinion so the gate rides clean. On one single-story stucco home off Westgate Avenue, our tech found a 1990s chain-link slide gate jumping its track every rain; the builder-grade operator was fine, but the track bed had washed out under the sand. We dug back 18 inches, set a new cement re-support, and re-squared the rack and pinion so the gate rides clean even after a downpour. Call (728) 203-0817 for a free estimate on a track re-support.
Yes, it’s normal here, and it’s not your fault. The humid subtropical climate and Atlantic salt air corrode the motor housing and the control board connections faster than the manufacturer’s average lifespan assumes. Plastic gears inside 1990s builder units strip under heat and humidity. A repair, often a gear set or a capacitor, runs $220 to $480; a full operator replacement runs $850 to $1,400. Call (728) 203-0817 and we’ll tell you which one your situation warrants.
Yes. We run new low-voltage conduit properly along the wall or under the ground, or we install a solar-charged battery operator where trenching isn’t practical. A new automation setup, including operator, two remotes, and a keypad, typically runs $1,600 to $2,800 in Westgate depending on gate length and weight. We’ll show you the written price before any digging starts. Call (728) 203-0817 to schedule a measure.
Not usually. In Westgate, aluminum slide gates from the 1980s and 90s sag at the hinge post as coastal humidity eats the post footing underground. The panel is often fine; the post needs re-anchoring or replacement. A new post footing and re-hang runs $400 to $900, far less than a new gate. Call (728) 203-0817 for an honest look.
Yes. We install gates and operators that meet current wind-load and entrapment-protection standards, including photo eyes, reverse-on-contact edges, and proper force settings. If your existing gate is being brought up to code, we’ll explain what’s required and give you a written quote. Call (728) 203-0817 and ask for Cody Beckman.
Call Latch and Post Gate Repair West Palm Beach for Electric Gate Repair in Westgate
If your Westgate gate is stuck, grinding, or jumping the track, call (728) 203-0817 now. A live person answers, day or night. We’ll give you a written price before any work starts, clean up like it’s our own home, and stand behind the repair with the 365-Day Done Right Promise. You don’t need to know what’s wrong. You just need to call.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Westgate.