Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across West Palm Beach
Electric gate repair in West Palm Beach usually comes down to three things: salt corrosion on moving parts, post footings shifting in saturated ground, and control boards tripped by storm surges. Most repairs run between $185 and $540 depending on whether we’re replacing a gear, re-seating a post, or swapping a control board. Our Latch and Post team knows the difference between a gate that needs a simple alignment and one that needs a footing rebuilt before we even arrive. Call (728) 203-0817 and a live person answers, day or night – no voicemail, no callback queue.
We serve every neighborhood in West Palm Beach, from the historic estates of El Cid to the gated communities off Okeechobee Boulevard and the ranch houses in Flamingo Park. When your automatic gate won’t open at 7 a.m. on a school morning, or you can’t get your car past a seized slide gate after a storm, you don’t need a receptionist. You need a technician who has worked on gates along Flagler Drive and knows what coastal salt air does to a DoorKing operator.
Key Takeaways
- Most electric gate repairs in West Palm Beach run $185 to $540, with a written price before any work starts.
- Salt air, saturated soil, and hurricane-force winds create failure patterns here that inland repair companies don’t see.
- We service Viking, Ghost Controls, DoorKing, and Elite equipment, with parts stocked locally.
- Every repair is covered by the 365-Day Done Right Promise. If it isn’t right, we make it right.
Why Latch and Post Gate Repair West Palm Beach Is West Palm Beach’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been fixing gates since 2009. But what matters to a West Palm Beach homeowner is simpler: the technician who shows up has seen your exact problem before. A Gate operator that seized after a power surge off Southern Boulevard. A swing gate sagging into the latch because the post shifted in sandy soil after three days of rain. A keypad fried by salt-laden humidity near the Intracoastal. These aren’t hypotheticals to us – they’re Tuesday.
Homeowners in El Cid, Prospect Park, and the South End call us because we name the real problem and quote the real number. A Viking control board replacement is different from a Ghost Controls arm motor repair, and you’ll see the exact price in writing before anything is touched. We don’t do diagnostic fees that vanish into a bigger invoice. We don’t sell a new operator when a surge suppressor and a reset would do the job. And we don’t leave your driveway until the gate cycles correctly and you’ve watched it work.
Our technicians are background-checked, uniformed, and trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. They show up with shoe covers and drop cloths if the job takes them inside your home, and they send a photo of the cleanup before they leave. That’s the Cedarwell C.A.R.E. routine – Clean up like it’s our own home, Ask before moving anything, Respect your time and quiet hours, Explain the price before the work. Every job, no exceptions.
Styles & brands we work with
Gate Access Control in West Palm Beach
Gate access control in West Palm Beach is the wiring, keypad, receiver, and intercom system that decides who gets in – and whether the gate itself is secure enough to keep working through salt air and storms. A typical access control repair here runs $145 to $395 for keypad replacement, receiver tuning, or intercom board work, while a full keypad-to-operator rewiring on an older estate gate might reach $650 to $900. We see the full range: vintage brick pillars in El Cid with 1980s intercom wiring, newer aluminum driveway gates in gated developments with cell-based access systems, and everything in between.
Keypad and Intercom Failure
West Palm Beach keypads take beating from direct sun and salt spray. Buttons stick, membrane switches crack, and the wiring behind the brick pillar corrodes. You’ll notice it first as a keypad that works intermittently, then stops entirely. We replace the unit or the corroded whip wiring, and we verify the operator is actually receiving the signal before we leave – not just that the keypad lights up.
Access Control Integration
When a West Palm Beach homeowner adds a phone-based entry system to an older FAAC or Elite operator, the receiver and antenna placement matter more than most people expect. Metal estate gates, stucco walls, and dense landscaping along Flagler Drive can block signal. We position antennae clear of the gate leaf and run the receiver wiring through sealed conduit so salt humidity doesn’t eat it over time.
Commercial Gate Operator in West Palm Beach
A commercial gate operator in West Palm Beach is a different animal than a residential opener – more cycles per day, heavier gates, and code requirements for entrapment protection that we treat as non-negotiable. Commercial operator repair here typically runs $350 to $900, with full operator replacement on a heavy slide gate reaching $1,400 to $2,600 installed. HOAs, condo associations, and office properties along Palm Beach Lakes Boulevard call us when the gate at the entrance stops responding, because a stuck exit gate isn’t an annoyance – it blocks half the residents from leaving for work.
High-Cycle Operator Failure
Commercial slide gates in West Palm Beach run hundreds of cycles daily. Rack-and-pinion teeth wear, rollers flatten, and the motor thermal-overloads repeatedly until it fails. We replace the rack section, swap the rollers, and check the operator’s duty cycle rating against actual daily use. Often the fix is mechanical – the gear teeth stripped because the gate was binding – and the operator itself is fine.
Storm Hardening for Commercial Gates
After a hurricane warning, commercial properties along Dixie Highway need their gates secure. But the operators often fail at exactly that moment because of corrosion and power surges. We install surge suppressors, upgrade to stainless hardware on salt-exposed operators, and verify the manual release works so your staff can open the gate during a power cut. A gate that can’t be manually released in a hurricane is a liability, and we make sure it isn’t.
Trusted Brands We Service in West Palm Beach
We’re factory-trained on the equipment West Palm Beach homeowners and commercial properties actually run. That means we stock Viking, Ghost Controls, DoorKing, and Elite parts locally, along with FAAC, BFT, Linear, LiftMaster, and Mighty Mule components. When your Ghost Controls swing arm stops responding or your Elite slide operator seizes, we don’t order parts and wait a week. We pull from our local inventory and get you running. One visit, right fix, no second opinion.
Common Electric Gate Repair Problems We See in West Palm Beach Homes
- Sagging swing gates after heavy rain. Post footings in West Palm Beach’s sandy, saturated soil shift under the weight of a heavy gate, throwing the latch out of alignment. We re-set the post with additional concrete and re-hang the gate so the sag is corrected at the post, not the panel.
- Seized slide gate rollers from salt corrosion. Salt-laden humidity eats rack-and-pinion teeth and roller bearings within months, causing jerky movement or complete seizure. We replace with corrosion-resistant hardware and lubricate with a marine-grade product so it holds up longer.
- Control board failures after power surges. Storm squalls and grid flickers trip control boards on FAAC, DoorKing, and Elite operators. We install surge suppressors at the operator and the panel so the next surge doesn’t take out your board again.
- Entrapment sensor faults from misalignment. Photocells get knocked out of alignment when gates sag or posts shift, and the gate refuses to close. We realign the sensors, verify the entrapment protection is working, and fix the underlying mechanical issue so it doesn’t repeat.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in West Palm Beach, FL
Electric gate repair in West Palm Beach typically falls into clear ranges. Gate motor repair runs $185 to $520 depending on whether it’s a swing arm or slide operator and what failed inside. Opener repair is usually $165 to $440. Keypad replacement runs $145 to $320. Remote control programming and receiver repair is $95 to $220. Safety sensor realignment or replacement runs $130 to $285. Control board replacement is $280 to $680 for most residential units, more for commercial systems. You’ll see the exact number in writing before we touch anything. No diagnostic fee that turns into a surprise. No pressure to approve. You get the quote, you decide, and the price doesn’t move.
We Also Serve Cities Near West Palm Beach
Our Electric Gate Repair team works throughout the Palm Beaches. We serve West Palm Beach, Palm Beach, North Palm Beach, Palm Beach Gardens, and Royal Palm Beach. Wherever you are, the same written price, the same cleanup routine, and the same 365-Day Done Right Promise apply.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Palm Beach
Salt air in El Cid corrodes the exposed metal on your operator – motor shafts, limit switch contacts, and terminal connections – and the damage accelerates fastest on ornate aluminum and wrought iron estate gates near Flagler Drive. Within 12 to 18 months, you’ll see green corrosion on terminals and stiff movement in the operator’s gear train. The fix is replacing corroded hardware with marine-grade stainless components and sealing electrical connections. We also recommend a corrosion-inhibiting spray on exposed operator parts. Call (728) 203-0817 for an inspection before the corrosion seizes the operator entirely.
Use the manual release. Every automatic gate operator has a release mechanism – usually a keyed cylinder or pull chain on the operator. Unlock it, disengage the operator, and push the gate open by hand. Then secure the gate in the open or closed position with a chain and padlock, not with the operator. If you can’t find the release or the gate won’t move by hand, the post may have shifted and the gate is binding. Call (728) 203-0817 and we’ll walk you through it over the phone, then send a technician once conditions allow. Never force an electric gate open against the operator – you’ll strip gears or shear the rack.
Because the post footing isn’t deep enough for the gate’s weight and the soil conditions in Flamingo Park. Sandy, saturated ground loses bearing capacity after heavy rain, and the post shifts under load. Adjusting the hinges or latch is temporary – the post will move again. The lasting fix is excavating the footing, setting the post deeper with additional concrete, and letting it cure before re-hanging the gate. In some cases we add a steel footing bracket or move the post location slightly. You’ll get the exact approach and price in writing before work starts. Call (728) 203-0817 for a free assessment.
Yes. Entrapment protection sensors are required by Florida building code for automated vehicular gates, and we treat them as mandatory on every repair. If your gate was installed before photocells were standard, or the sensors are damaged, misaligned, or bypassed, we’ll flag it and quote replacement as part of the repair. The sensors stop the gate if a child, pet, or vehicle is in the path. We won’t restore power to a gate with non-functional entrapment protection. That’s not a company policy – it’s the law, and it’s also the right thing to do for families with kids and pets. Call (728) 203-0817 if you’re unsure whether your sensors are working.
For solid infill gates, especially the ornamental aluminum and wrought iron designs common in Prospect Park, wind load is the real threat. A solid gate acts like a sail, and the force transfers to the hinges, the post, and the operator. Before a hurricane warning, open the gate and secure it in the fully open position with a chain and padlock so wind can pass around it. If you must close it, engage the operator’s manual release so the gate isn’t fighting the motor during gusts. For long-term protection, we install wind-rated hinges, reinforce post footings, and set stops that brace the gate against the post when closed. Call (728) 203-0817 to schedule a wind-load assessment before the next storm season.
One More Thing About West Palm Beach Gates
Here’s what we’ve learned fixing gates here that a generic repair page won’t tell you. Coastal salt air combined with hurricane-force winds accelerates corrosion on ornate aluminum and wrought iron estate gates in El Cid and Prospect Park in a way you don’t see inland. The failure isn’t cosmetic – the salt eats hinge pins, gate wheels, and operator gears from the inside out. Meanwhile, solid infill gates catch tropical-storm gusts like a sail, and the force doesn’t bend the panel as much as it overloads the hinge post. The post shifts in sandy, saturated ground, and suddenly the gate sags, the latch misses, and the entrapment sensors trip every time. We saw it on a recent call off Flagler Drive in El Cid: a stuck swing gate after a squall. The FAAC operator’s control board had tripped from a power surge, and the hinge post had shifted in saturated soil. We reset the operator, installed a surge suppressor, and re-seated the post footing with additional concrete before re-hanging the gate and realigning the safety photocells. That’s not a rare job here – it’s the defining repair pattern of West Palm Beach.
So we don’t just replace parts. We reinforce what the weather and the soil will attack next. Corrosion-resistant hardware on salt-exposed components. Deeper, wider post footings where the ground saturates. Surge suppression on every operator near the coast. A written price before we start. Shoe covers and drop cloths inside your home. A photo of the cleanup before we leave. And if it isn’t right, the 365-Day Done Right Promise means we make it right – no argument, no fine print.
Call (728) 203-0817 for a free estimate on any electric gate repair in West Palm Beach. A live person answers, 24 hours a day, every day. Not a voicemail. Not a callback queue. A person who can schedule your repair and give you a straight answer on what it costs.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, part of the Cedarwell family of gate specialists.