Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Lake Park
Gate installation in Lake Park usually costs between $2,800 and $9,500 for a complete driveway gate with operator, depending on the gate style, material, and how much custom fabrication your property needs. A standard pedestrian gate runs $850 to $2,200 installed. We install driveway gates, swing gates, sliding gates, double gates, and security gates across Lake Park neighborhoods, from the 1950s masonry homes off 10th Street to small commercial properties along Northlake Boulevard. Call (728) 203-0817 and a live person answers, day or night, to schedule your free measure and written quote.
Why Latch and Post Gate Repair West Palm Beach Is Lake Park’s Preferred Gate Installation Company
Lake Park’s housing stock is unlike anything in nearby Palm Beach Gardens or Wellington. Most homes here were built between 1950 and 1970, with concrete block walls, shallow driveway setbacks, and shared property lines that leave almost no room for error on a gate installation. Our team providing Gate Repair in Lake Park has done enough work here to know which driveways need offset post footings, which hinge placements will clear a neighbor’s fence, and which operator styles survive the salt air that blows in from the Atlantic. That local knowledge is not something a general contractor shows up with on day one.
Cody Beckman leads our team, and he has built our Lake Park reputation around one thing: the written price you receive before we touch anything. Every visit includes shoe covers, drop cloths where we pass through the home, and a cleanup photo before we leave. We do not ask you to remind us. It is part of the Cedarwell C.A.R.E. values our uniformed, background-checked technicians work under: clean up like it is our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work begins. Every installation is backed by the 365-Day Done Right Promise. If something is not right, we make it right. No argument.
Styles & brands we work with
Driveway Gate Installation in Lake Park
Driveway Gate Installation in Lake Park starts with a free on-site measure where we look at your driveway width, post locations, setback to the street, and neighboring fence lines. Most Lake Park driveways are narrow, which means a standard off-the-shelf gate kit usually does not fit without modification. We custom-fabricate steel, aluminum, or ornamental iron gates to match your masonry home’s style, then pair them with an operator sized for the gate’s weight and frequency of use. A typical driveway gate installation in Lake Park runs $3,200 to $8,500 for a single swing or sliding gate with operator, keypad, and safety sensors. Double driveway gates start around $5,500.
Custom Fabricated Steel and Ornamental Gates
For the older Lake Park homes with distinctive mid-century masonry facades, we fabricate gates that match the existing architectural details rather than bolting on something generic. Powder coating is standard, but we add a marine-grade zinc primer beneath the finish on any gate within a mile of the Intracoastal. Salt air here is relentless, and that extra primer layer is the difference between a gate that still looks new in five years and one that starts rusting at the welds in two.
Swing Gate Hardware and Post Footings
Lake Park’s soil is sandy and drains fast, but the original concrete slabs and walkways on 1950s and 60s lots often hide cracks or shallow footings. We core through the existing slab when needed and pour a proper reinforced footing for the hinge post, set at exactly the right offset so the gate swings clear of a neighboring fence on a shared driveway line. This is the detail that separates a gate that operates smoothly for a decade from one that sags within a year.
Sliding Gate Installation in Lake Park
Sliding Gate Installation in Lake Park is the practical choice for the town’s narrow shared driveways where a swing gate simply does not have room to arc. A cantilever sliding gate rides on rollers above the ground, so we can install it over uneven pavement without trenching across your driveway. Typical Lake Park sliding gate installations run $3,800 to $9,500, with the higher end covering heavy custom steel gates over 12 feet wide that need a stronger operator and reinforced track or cantilever rollers. We install rack and pinion drives, chain drive systems, and cantilever roller systems, and we always size the motor for the actual gate weight plus wind load, since coastal gusts hit Lake Park hard during summer storms.
Rack and Pinion Drives with Corrosion Protection
The rack and pinion drive is efficient, but exposed steel rack teeth rust quickly in Lake Park’s humid, salty air. We install galvanized or nylon-encased rack where available, and on steel rack we apply a protective lubricant coating that holds up to coastal conditions. We also raise the motor housing off the slab with a sealed base plate so standing water from a summer downpour cannot seep into the gearbox.
Tight-Clearance Sliding Gate Fits
Many Lake Park side yards are barely wider than the gate itself. We fabricate sliding gates with slimline frames and position the track or rollers to hug the fence line, preserving every inch of your remaining driveway. We also check travel distance against property markers so the gate never crosses onto a neighbor’s side of a shared fence.
Trusted Brands We Service in Lake Park
We are factory-trained on the operators families in Lake Park actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For installations, we commonly pair FAAC swing operators with ornamental steel gates, and BFT sliding operators with heavier commercial-style driveway gates. Linear keypads and receivers are our standard entry controls. We keep replacement parts stocked locally for these three brands in particular – FAAC, BFT, and Linear – so if your operator needs a new control board or limit switch in year two or three, you are not waiting a week for a part to ship from a warehouse.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Lake Park Homes
- Salt air rust on exposed steel gate frames: Within two or three seasons, unprotected welds and rack teeth on new gates near the Intracoastal start showing orange streaking. We address this with marine-grade primer before powder coating and sealed stainless hardware on every coastal install.
- Underground operator flooding: Summer thunderstorms dump water fast on Lake Park’s flat lots, and below-ground operators short out when their drain fails. We recommend above-grade or sealed-base operators on flood-prone lots, especially east of Old Dixie Highway.
- Narrow driveway clearance forcing sensor omission: Unlicensed installers sometimes skip safety photocells because there is no room for standard mounting. That creates an entrapment hazard and a UL 325 violation. We use low-profile or reflective sensors and offset brackets to keep the safety system intact on tight lots.
- Corroded 1960s gate posts throwing hinges out of plumb: We regularly find original steel posts on Lake Park homes shifted a full inch or more as the buried section rusts. Installing a new gate on that post guarantees sag and strain on the operator. We replace or sister the post before any new gate goes on.
Pricing for Gate Installation in Lake Park, FL
Here is the honest range for Lake Park, based on what we actually install here. A single custom swing driveway gate with keypad entry and a FAAC or BFT operator runs $3,200 to $7,500 installed. A 12-foot sliding gate with operator runs $3,800 to $9,500. Pedestrian gates run $850 to $2,200. Double driveway gates start at $5,500 and go up based on width and ornamental detail. What moves the number: gate length, steel thickness, ornamental scrollwork, operator brand, safety sensor configuration on a tight driveway, and whether your existing post footing needs replacement. You get the exact number in writing before we start, and we never begin work without your approval of that figure. Call (728) 203-0817 for a free measure and written estimate. No pressure, just a straight answer.
We Also Serve Cities Near Lake Park
Our crews work throughout central Palm Beach County. Beyond Lake Park, we install gates in West Palm Beach, Palm Springs, Wellington, and Palm Beach Gardens. If you are in a neighboring city, an easy way to see what a custom gate costs there is our Gate Installation guide. Scheduling and dispatch are coordinated from our South Florida office; the technicians who show up at your home are local to the Lake Park area.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lake Park
Yes, if you live within about a mile of the Intracoastal or the Atlantic, standard powder coating alone is not enough for Lake Park’s salt air. We apply a marine-grade zinc primer beneath the powder coat on all coastal installations, use stainless or hot-dip galvanized hardware, and seal tube frame interiors with a rust-inhibiting cavity wax. Without those steps, you will see rust at the welds and bolt holes within two to three years. Call (728) 203-0817 and ask us to quote the coastal package on your gate.
We set the hinge post footing at an offset that gives the gate its full arc without crossing the neighbor’s fence line, and we fabricate the gate width to match the exact driveway opening rather than forcing a stock size in. On especially tight lots, we will recommend a sliding gate instead, since it travels parallel to the fence and uses no arc space at all. Every installation includes a site measure before we quote, so we catch tight clearances before the gate is built. Estimates are free.
Sometimes. The deciding factor is the condition of the hinge posts and the gate’s current weight versus what the original fabricator intended. Many 1960s steel gates in Lake Park have posts corroded below grade, which means adding an operator will magnify the sag and burn out the motor. If the post is sound and the gate swings freely by hand, we can retrofit a FAAC or BFT operator and add safety photocells and a keypad. We will tell you honestly if the post needs replacement first, and show you why before we quote it. Call (728) 203-0817 for a free post inspection.
Generally no. Lake Park is flat, and summer thunderstorms can drop two or three inches of rain in an hour, which overwhelms below-grade operator drains and shorts the motor or loop detector. We recommend above-ground operators with sealed base plates for any Lake Park lot that pools water after a heavy storm. If you already have an underground operator that floods, we can replace it with an above-grade unit and keep it inside the same wheel path.
In most Lake Park residential installations, a permit is required when the gate is motorized, when you are pouring new post footings, or when the gate sits within a required front setback. The specific requirement depends on your property’s zoning and the gate’s distance from the street and property lines. We handle the permit paperwork for every installation and include the drawings the town asks for, so you are not chasing down approvals yourself. Call (728) 203-0817 and we will tell you exactly what applies to your address.
When you want a high-end gate on a 1950s Lake Park lot, the real question is not which gate looks best in a catalog. It is whether the installer knows how to keep it off your neighbor’s fence, keep it from flooding in a summer storm, and keep the steel from rusting in the salt air. That is what we work on here every week. Call (728) 203-0817 and a live person answers. We will schedule your free measure, give you a written price, and if you hire us, you will get the gate done right with the 365-Day Done Right Promise behind it.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Lake Park since 2009.