Ghost Controls Access Control Installation Nationwide

Ghost Controls Access Control Installation: The West Palm Beach Owner’s Guide

Ghost Controls access control installation in West Palm Beach typically runs between $220 and $480 for parts and labor, and most jobs are completed in a single visit. We stock Ghost Controls-compatible keypads, receivers, and vehicle sensors on the truck, and we can usually have a technician at your home within 24 hours. Latch and Post Gate Repair West Palm Beach is an independent service provider, not affiliated with Ghost Controls, and we’ll never sell you a part your system doesn’t actually need.

Call (728) 203-0817

Most owners realize their Ghost Controls access control has failed the same way: the keypad looks fine but won’t open the gate, or the remote works from ten feet but not from the driveway, or the entry sensor stopped picking up cars entirely. The gate itself often still runs fine on manual control. That’s the tell. It’s rarely the operator. It’s the access control component, and that’s a specific repair with a specific fix.

Key Takeaways:

• Most Ghost Controls access control failures are the keypad, receiver, or vehicle sensor, not the operator itself
• We stock Ghost Controls-compatible parts locally, so there’s no week-long wait for shipping
• You’ll get a written price before any work starts, every time
• Our 365-Day Done Right Promise covers the installation

Which Ghost Controls Models This Applies To

Ghost Controls makes a few distinct access control lines, and the part you need depends on which one your gate uses. The most common in West Palm Beach are the AXDP keypad and the AXR receiver, which pair with the TSS1, TDS2, and AXD series operators. If you have a Ghost Controls solar-powered gate, you’re likely running the same AXR receiver paired with a 433 MHz remote, and the access control wiring follows the same pattern as the AC-powered models.

Here’s the compatibility gotcha we run into regularly: Ghost Controls keypads are not one-size-fits-all. The older AXDP keypad won’t talk to the newer AXR receiver without a specific programming sequence, and some aftermarket keypads sold online as “Ghost Controls compatible” only work with the TSS1 series, not the TDS2. We’ve had to swap out more than a few Amazon-bought keypads that simply refused to pair. Before you order anything, look at the label on the underside of your current keypad or receiver. It’ll have a model number printed in small white text. Take a photo of it. That single step saves more time than anything else in this repair.

On the OEM-versus-aftermarket question, our honest take is this: Ghost Controls OEM parts are well made and we install them regularly, but a quality aftermarket receiver from a manufacturer like Linear or LiftMaster often performs just as well at roughly 20 to 30 percent less. We’ll present both options with the price difference in writing, and we’ll never steer you toward the pricier part without a reason specific to your setup.

Signs Your Ghost Controls Access Control Installation Is Failing

• The keypad lights up but the gate won’t move. This usually means the keypad is sending a code the receiver no longer recognizes. Corrosion on the keypad contacts from humidity is the most common culprit we see in West Palm Beach, especially within a mile of the intracoastal.
• The remote only works from a few feet away. If you used to open the gate from the end of the street and now you have to be on top of it, the receiver’s antenna connection or the receiver itself has degraded. Salt air accelerates this in our area.
• The vehicle sensor has stopped triggering the gate. Ghost Controls vehicle sensors sit in the driveway and take a beating from rain, sun, and the occasional tire. Over time the housing develops hairline cracks and moisture gets inside. Once that happens, the sensor’s range drops sharply or it stops working entirely.
• The gate opens on its own or won’t stay closed. This is often a receiver picking up a stray signal from a neighboring gate or a failing relay inside the control board. It’s intermittent, which makes it maddening, but it’s diagnosable.
• You hear a faint buzzing from the control box when you press the keypad. That’s usually the relay chattering, not engaging. It’s a sign the access control module is failing mechanically and will likely need replacement inside a few weeks.

Replacement Cost & What’s Included

In West Palm Beach, expect to pay between $220 and $480 for a Ghost Controls access control installation, depending on which component has failed. A simple receiver swap typically lands around $220 to $280. A keypad replacement with programming runs $280 to $340. A new vehicle sensor that requires trenching and new wiring reaches $400 to $480.

Every quote we give is a written price before any work begins. That price includes the part, the labor, cleanup, and a photo of the finished work before we leave. You’ll know the exact number before we touch anything, and that’s the number you’ll pay. No surprise line items, no “we found something else” upsell halfway through. The installation is covered by our 365-Day Done Right Promise. If it’s not right, we come back and make it right. No argument, no fine print.

We lay drop cloths on the floor and put on shoe covers before we step inside, because this job often runs wire through the garage or a hallway. If you have pets or a sleeping kid, we’re careful about noise. Quiet tools matter to us because they matter to you.

DIY or Call Us?

There are two or three things you can safely check yourself, and one thing you shouldn’t touch. The safe checks: confirm the operator has power (is the breaker on, is the battery charged), confirm the keypad batteries aren’t dead, and take a photo of the model label. That’s it. Those three things tell you something useful without risking anything.

What you shouldn’t do is open the operator housing and start testing wires. Ghost Controls operators carry live AC voltage, and the wrong probe placement can fry the control board, which turns a $250 access control repair into a $900-plus operator replacement. The control board is not a forgiving piece of electronics. If you’ve done the three checks above and the gate still won’t respond to the keypad or remote, the access control component itself is the likely failure. That’s a call to us at (728) 203-0817, and we’ll give you an honest answer before we ever send a truck out. Tell me what it’s doing and what it stopped doing. That’s usually enough to get started.

FAQs