Ghost Controls Electric Gate Repair Nationwide

Ghost Controls Electric Gate Repair in West Palm Beach: What to Know First

Ghost Controls electric gate repair in West Palm Beach is something our team handles regularly, and most jobs are diagnosed and fixed in a single visit. We’re an independent Ghost Controls service provider, which means we work on your opener the way a careful technician should: diagnose first, explain the problem in plain words, and give you a written price before we turn a single screw. Typical repairs run between $180 and $420 depending on what failed, and you’ll know the exact number before work begins. If you’re in West Palm Beach and your gate stopped opening, is grinding, or the keypad stopped responding, call us at (728) 203-0817 and we’ll walk you through what we’re seeing.

Call (728) 203-0817

Key Takeaways

• Most Ghost Controls repairs in West Palm Beach are completed same visit, with parts on the truck.
• We provide a written price before any work starts, every time.
• We service the full Ghost Controls kit: arms, control boards, keypads, remotes, and safety eyes.
• Factory-trained techs who also work on LiftMaster, Mighty Mule, and DoorKing, so if a Ghost Controls part is delayed, we know your options.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls makes solid residential gate operators, but after years in the West Palm Beach salt air, we see the same handful of problems repeat. Here’s what actually goes wrong, and what we do about it.

• AXS1 and AXP1 arm systems: gear wear from wind load. The single-arm and dual-arm kits are common on West Palm Beach driveway gates, and we regularly find the internal plastic gear wearing into a flat spot. The symptom is a gate that moves a few inches, then stops with a click. We replace the gear with a quality aftermarket part when the OEM gear is backordered, and we always tell you which we installed and why.
• TSS1 and TSS1XP solar systems: battery failure disguised as opener failure. A lot of West Palm Beach homes run Ghost Controls on solar, and when the gate gets slow or stops responding entirely, homeowners assume the motor died. We check the battery voltage first; in our experience, the battery is dead in about seven of ten calls. We bench-test the battery, confirm the panel is still delivering charge, and replace only what actually failed.
• AX1 control board: relay click, no arm movement. This is the Ghost Controls failure that trips up general repair companies. The board relays click, but the arm doesn’t move. It’s rarely the motor; it’s usually a failed relay on the board or a corroded connection at the battery terminal. We test continuity at the harness before recommending a board replacement. That saves you from buying a motor you didn’t need.
• WKP1 keypad: dead zones on number 2 and number 5. The membrane keypad on the WKP1 wears out in the Florida sun and humidity. Numbers 2 and 5 fail first because they sit where thumbs land most often. We replace the pad with a sealed aftermarket unit that holds up better to direct sun than the original film, and we caulk the seam to keep rain out.
• Remote range collapse in coastal neighborhoods. Near the Intracoastal and along Flagler Drive, we see Ghost Controls remotes lose range dramatically. The cause is usually corrosion on the antenna connection at the control board, not a weak remote. We clean the antenna base, apply a small amount of dielectric grease, and range-test from 60 feet. Most clients get their driveway-to-door range back in under 30 minutes.

Our Ghost Controls Electric Gate Repair Process

Here’s what a Ghost Controls repair visit looks like when you call Latch and Post Gate Repair West Palm Beach.

1. 1
   You call, a live person answers. Our dispatcher asks what the gate is doing and what it stopped doing. That’s enough to start the right diagnostic before the truck moves.
2. 2
   We arrive and listen to the opener run. Before we touch anything, we test the gate through a full cycle. We ask before we move or open anything else on the property.
3. 3
   Diagnosis in writing. We open the control box, check voltage at the battery and board, test the arm’s free movement, and inspect the safety eyes. Then we write down exactly what failed, what we recommend, and the price to fix it. No work starts until you’ve seen that number.
4. 4
   Parts decision, explained clearly. If Ghost Controls OEM parts are available, we use them. If a quality aftermarket part makes better sense for a 15-year-old opener, we tell you why and give you both prices.
5. 5
   The repair and the test. We make the fix, then run the gate through 10 full cycles, test the safety reverse, and confirm the keypad and remote both work.
6. 6
   Cleanup, photo, and the Done Right Promise. We put on shoe covers and lay drop cloths before stepping inside to test wall buttons or keypads. When we’re done, we take a photo of the cleaned work area and email it to you. Every Ghost Controls repair we do is covered by our 365-Day Done Right Promise: if it’s not right, we make it right, no argument.

What Ghost Controls Electric Gate Repair Costs in West Palm Beach

Here are the numbers we quote most often on Ghost Controls systems in West Palm Beach. These are ranges; your exact price is on paper before we begin.

• Battery replacement (solar TSS1/TSS1XP): $95 to $180, depending on battery type and condition of the solar charge harness.
• Remote programming and range repair: $75 to $140, including antenna-base cleaning and two remotes tested.
• Keypad replacement (WKP1): $150 to $260 installed, sealed against moisture.
• Control board diagnosis and relay repair: $180 to $340, depending on whether we repair the relay or replace the board.
• Arm gear replacement (AXS1/AXP1): $190 to $320, including bearing check and full-cycle testing.

What moves the price is parts availability. Ghost Controls OEM parts can take a few days in West Palm Beach; aftermarket replacements are often on our truck the day you call. We give you both options and the prices for each so the decision is yours. Call (728) 203-0817 for an exact quote; the estimate is free.

Why West Palm Beach Homeowners Call Latch and Post Gate Repair West Palm Beach for Ghost Controls Work

Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and we’ve done it in West Palm Beach since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Our technicians are background-checked, uniformed, and factory-trained on Ghost Controls, plus LiftMaster, Mighty Mule, and DoorKing. That matters when a Ghost Controls board is a week out and a quality aftermarket part gets your gate moving tomorrow. We lay drop cloths on the floor and put on shoe covers before we step inside; your floors stay clean; we choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. Cody Beckman, our owner, grew up in Los Angeles and picked up his first gate hardware at a trade program through Los Angeles Trade-Technical College, where instructors let him take apart a LiftMaster operator three times before he fully understood it. He has spent the better part of fifteen years working gate systems across South Florida, and in West Palm Beach he tends to see Ghost Controls openers that have quietly worn down in the salt air. We take our time diagnosing before recommending a single part. Writes down what we find on every job, because we like knowing exactly what we touched and why. Every repair is backed by the 365-Day Done Right Promise. Call (728) 203-0817 and you’ll get a live person around the clock, nights weekends and holidays included.

FAQs