Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Installation in West Palm Beach: What to Know First
Linear gate installation in West Palm Beach typically runs between $900 and $2,800 for a standard residential swing gate with a Linear operator, depending on gate size, power access, and whether we’re replacing an old operator or starting from scratch. Most single-gate Linear installations take one full day, and double gates or new concrete pads can stretch to two. We’re an independent Linear service provider, which means we install and service Linear openers without being tied to factory service windows or corporate pricing. If you own a Linear product and need a gate installed around it, call (728) 203-0817 and we’ll give you a written price before any work starts.
This page is for homeowners in West Palm Beach who already own Linear gate equipment, or who’ve been quoted a Linear setup and want to know what they’re actually getting. We’ll walk through how Linear openers fail in this climate, what our installation process looks like, and what you should expect to pay.
How Linear Products Fail – and How We Fix Them
Linear builds dependable residential gate openers, but South Florida has its own way of wearing things down. Here’s what we see on Linear jobs in West Palm Beach.
- Linear LRA actuator arms seizing from salt air. The LRA (Linear Residential Actuator) series is common on West Palm Beach swing gates, and the pivot points on those arms accumulate salt-laden grit faster than the factory expects. We regularly see arms that still run but groan or hesitate mid-stroke. The fix is disassembling the arm, cleaning the pivot, and re-greasing with a marine-rated lubricant, then cycling it under load. If the internal limit switches are corroded, we replace the arm rather than patching it.
- Linear MegaCode receivers losing range near older concrete-block homes. The MegaCode receiver is solid, but in older West Palm Beach neighborhoods with thick block walls and metal hurricane shutters, range can drop to twenty feet or less. Before replacing a receiver, we check antenna placement and interference from nearby LED transformers. Often the receiver is fine; it just needs remounting away from the motor housing and the transformer line.
- Linear APeX circuit boards failing after storm-season power surges. The APeX board is more sensitive to voltage spikes than some competitors. We see boards that test fine on low voltage but die the moment the gate meets resistance, usually after a summer thunderstorm surge worked through the system. We always install a surge suppressor on the operator branch circuit when we swap an APeX board, because replacing the board without addressing the surge source means replacing it again next year.
- Under-sized Linear operators on heavy gates. Linear rates its operators by gate weight and cycle count, but a common West Palm Beach issue is a gate that grew heavier over time: someone hung a privacy screen, added a weld, or let hinge wear add drag. We weigh and cycle-test the gate during the estimate, not just the operator. If a Linear LS series isn’t rated for the actual gate weight, we’ll tell you before we install it, rather than installing something that burns out motors.
- Photo-eye misalignment on Linear swing gates after landscaping shifts. Linear photo eyes are sensitive to alignment, and in sandy West Palm Beach soil, posts settle and shift the beams. A gate that reverses for no clear reason often has a photo eye that drifted out of alignment. We check the foundation of the sensor posts, not just the beam, so we’re not re-aligning the same eyes every season.
Styles & brands we work with
Our Linear Gate Installation Process
Here’s how a Linear gate installation goes from the first phone call to the final walk-through.
- 1
You call, a person answers. A live person answers at (728) 203-0817, any hour. We take down what you have, what it’s doing or not doing, and when you’d like us out. Cody Beckman, our owner, still keeps a notebook in the truck and writes down what he finds on every job because he likes knowing exactly what he touched and why.
- 2
We measure and diagnose in person. We weigh and cycle-test the gate, check the posts in the ground, verify power access, and look at the existing wiring. This is where we catch things a phone estimate can’t see: a hinge that’s dragging, a post that’s drifted, a photo eye that’s been misaligned for months.
- 3
You get a written price before any work starts. We write down the exact cost, including any parts we’re recommending and why. No pressure. If you need a day to think about it, that’s fine.
- 4
We install with OEM or quality aftermarket parts, and tell you which is which. For Linear operators, we prefer OEM control boards and receivers when available, and we’ll tell you if a quality aftermarket part makes more sense for an older system. We never install a part without saying what it is and what it costs.
- 5
We test under load, then clean up. We run the gate through full open-close cycles with weight on it, check force settings against the gate’s actual weight, and verify the safety reversal. Then we clean up: shoe covers and drop cloths inside the home, a photo of the clean-up before we leave.
- 6
The 365-Day Done Right Promise covers it. If something isn’t right with the installation, we make it right, no argument, no fine print.
What Linear Gate Installation Costs in West Palm Beach
Here are the numbers we give homeowners when they ask what a Linear installation will run.
| Job | Typical Range in West Palm Beach |
|---|---|
| Single swing gate, new Linear arm operator | $900 – $1,600 |
| Double swing gate, dual Linear operators | $1,800 – $2,800 |
| Pedestrian gate with Linear keypad and lock | $600 – $1,100 |
| Sliding gate with Linear rack and operator | $1,400 – $2,400 |
| Full replacement: gate, posts, and Linear operator | $2,200 – $4,500+ |
| Linear part-only reinstallation on existing gate | $350 – $650 |
What moves the price: gate weight and width, whether concrete work is needed for new posts or a pad, the distance from your panel to the operator, and whether we’re repairing an existing gate or hanging a new one. Every West Palm Beach job gets a written quote before work begins, so the number we agree on is the number you pay. Call (728) 203-0817 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy West Palm Beach Homeowners Call Latch and Post Gate Repair West Palm Beach for Linear Work
We’re not a general handyman service that happens to touch gates. Latch and Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists; gates are what we do. Every Linear installation we take on is covered by the 365-Day Done Right Promise, which means if we get it wrong, we make it right. Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every job: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside, your floors stay clean. And because we service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing as well as Linear, the technician who shows up understands how Linear compares and what matters on your specific install.
FAQs
Yes, in most cases. Linear operators are designed to mount on standard swing and slide gate hardware. The things that matter most are gate weight, hinge condition, and the quality of the post foundation. We weigh and cycle-test before recommending a Linear model so the operator is matched to the gate it’s actually moving.
Yes. Linear residential gate operators and MegaCode receivers are still widely available through supply channels we use regularly in West Palm Beach. For older Linear models where the factory part is discontinued, we can often match a quality aftermarket equivalent and tell you the difference before installing it.
Most single gate Linear installations are done in one day, assuming the existing posts and gate are sound. A double gate or an install that includes new posts and a concrete pad may take two days. We’ll give you a timeline in writing with your estimate.
If the operator is under eight years old and the failure is a board, receiver, or photo eye, repair usually makes sense. If the operator is 12-plus years old and the arm is seized or the housing is cracking from sun exposure, replacement with a new Linear unit often costs less over the next five years than repeated repairs. We’ll show you the numbers for both options before you decide.
Yes. We run conduit, pull low-voltage wiring, and install and verify the photo eyes and safety edges on every Linear gate installation. The price for power work is included in the written estimate, not added as a surprise line item later.
Talk to Us About Your Linear Gate
If you’ve got a Linear gate that needs installing, replacing, or just diagnosing, call (728) 203-0817. A live person answers, any time of day or night. We’ll schedule a visit, give you a written price before any work begins, and your floors will be just as clean when we leave as they were when we arrived. Tell me what it’s doing and what it stopped doing, that’s usually enough to get started.
Written by Cody Beckman, Owner, Latch and Post Gate Repair West Palm Beach at Latch and Post Gate Repair West Palm Beach, serving West Palm Beach and nearby areas.