Gate Parts & Welding Cost - What It Actually Costs, Quoted Free

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Parts & Welding Cost in West Palm Beach?

Gate parts and welding in West Palm Beach run between $95 and $1,200 depending on what’s broken. A standard hinge replacement or latch repair usually falls in the $95 – $280 range, while structural welding on a sagging steel gate typically costs $250 – $650. Full post replacement with concrete work and welding can reach $800 – $1,200 or more.

These numbers reflect what we see across West Palm Beach neighborhoods, from El Cid to Riverwalk to the acreage lots out in The Acreage. Salt air, afternoon storms, and the constant cycle of heat and humidity take a real toll on gate hardware here, and that shows up in the kinds of repairs homeowners need. The good news is that most gate parts and welding jobs are a one-day fix, and you’ll know the exact number before any work starts.

Gate Parts & Welding Cost Breakdown (2026)

Here’s what homeowners in West Palm Beach can expect to pay for common gate parts and welding work in 2026. These are the prices we quote day in and day out, so they’re grounded in what’s actually happening in this market, not national averages.

What moves a job from the low end to the high end? Three things, mostly. First, the condition of the surrounding hardware. A weld on a gate whose hinges are also shot is a bigger job than a weld on an otherwise sound gate, because everything has to work together. Second, access. Gates on tight Northwood Hills lots or backed against thick landscaping take longer. Third, the gate’s weight and material. Solid steel and wrought iron are heavier and slower to work than aluminum, but they weld differently too, and getting the heat right matters.

One note on electric gate work: the repair cost above covers the gate hardware itself. If the issue is in the opener, motor, or control board, that’s a different scope. We’re glad to diagnose that too, since our team is factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. You’ll get a clear answer on what’s what before anything is opened up.

What Affects Gate Parts & Welding Pricing in West Palm Beach

• Salt air and humidity. West Palm Beach sits right on the Atlantic, and that salt air corrodes steel gate frames faster than inland locations. We regularly replace hinges in neighborhoods like Southland Park and Poinciana Park where the original hardware has rusted through in under ten years. Corrosion repair takes more prep work, and that affects the labor.
• Gate material. Aluminum costs less to work with because it’s light, but it requires a careful touch when welding. Wrought iron and steel hold up longer in coastal air but cost more to repair when sections need cutting and re-welding. Vinyl and wood gates rarely get welded; they usually need post or hardware replacement instead.
• Whether the post itself has shifted. Sandy Florida soil settles. When a post leans, replacing a hinge or welding the gate frame won’t fix the underlying problem. A post reset in a neighborhood like Pinewood Park, where the ground is sandy and moves with heavy rains, is a bigger job than a quick hinge swap.
• Electric gate components. If the gate swings on an opener, any parts replacement has to work with the motor. Sometimes the mechanical fix and the electrical fix are separate jobs. We see this often with Ghost Controls and Mighty Mule setups in newer West Palm Beach communities, where owners have the skills for basic fixes but want a factory-trained hand on the electrical side.
• Welding location on the gate. A cracked weld at the bottom corner of a gate is straightforward. A crack where the gate meets the post, or along the top rail where weight is concentrated, takes longer and may require reinforcing plate steel. The difference can be $200 or more on a larger gate.
• Time of year. Summer afternoon storms roll through West Palm Beach almost daily from June through September. Welding outdoors in that window is slower, and scheduling gets tighter. Morning appointments are easier to get, and sometimes easier on the budget if the job can be quoted with dry-weather timing.

How to Save on Gate Parts & Welding

The biggest money-saver is catching small gate problems before they become structural ones. A sticky latch that gets ignored for a year turns into a gate that’s been slammed shut hundreds of times, and that stress travels through the frame, the hinges, and eventually the post. By then you’re not just buying a latch; you’re paying for a weld or a post reset.

Here are a few practical ways West Palm Beach homeowners keep gate costs down:

• Inspect the hardware every few months. Look at the hinge bolts, the latch plate, and the bottom of the post. If you see rust bloom or the gate is scraping the ground, get it looked at sooner rather than later.
• Ask for a quote that separates parts from labor. Knowing where the money goes helps you compare apples to apples, and it tells you whether spending a bit more on a better hinge saves you a second repair in two years.
• Consider welding as a fix before replacing the gate. A gate that has a cracked frame rail or a broken weld at the corner is often repairable for a few hundred dollars. A new custom gate in West Palm Beach can run $2,000 to $6,000 installed.
• Do the small maintenance yourself. Spraying hinges with a lubricant designed for exterior metal, keeping vegetation off the gate, and clearing the track on a sliding gate are all safe ways to extend the life of the hardware. It’s when parts are seized, broken, or load-bearing that you want a trained eye.
• Take advantage of a free estimate. Calls to Latch and Post Gate Repair West Palm Beach are answered by a live person 24/7, and a written price is provided before any work begins. If the quote doesn’t fit your budget, there’s no obligation and no pressure.

A note on welding safety: any structural weld on a gate involves high heat and load-bearing steel. A gate that comes off its hinges or a broken weld that fails under weight can cause serious injury. This is work for someone who knows the material and the forces involved, not a Saturday afternoon project. We’re glad to explain what the job involves, but we won’t advise anyone to weld a structural gate themselves.

For a more detailed look at what this work includes, see our page on Gate Parts & Welding in West Palm Beach.

What’s Included When You Hire Latch and Post Gate Repair West Palm Beach

Every visit follows the same routine, and it’s one homeowners consistently tell us they haven’t seen before. We lay drop cloths on the floor and put on shoe covers before we step inside. If the gate job touches a wall or a walkway, the path is protected. Pets and kids matter on this kind of work, so we choose pet-safe lubricants where there’s a choice and can schedule around nap time if quiet matters.

Our technicians follow the Cedarwell C.A.R.E. values on every job. We clean up like it’s our own home. We ask before moving or touching anything. We respect the family’s time and quiet hours. And we explain the price before the work, in writing, every single visit. That’s not an upsell or an add-on; it’s how the job starts.

The people who come to your home are background-checked and uniformed, and they’re factory-trained on the brands families actually own around here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the right fix on the first visit, not a trial and error situation.

Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on. Latch and Post has been doing this work since 2009 as part of the Cedarwell family of independently owned and operated gate specialists, and every repair and installation is backed by the 365-Day Done Right Promise. If the repair or installation isn’t right, we make it right. No argument, no fine print.

You can learn more about what we do and how we work by visiting our home page.

FAQs – Gate Parts & Welding Cost

How much does a gate latch replacement cost in West Palm Beach?

A gate latch replacement in West Palm Beach typically costs $95 to $220 including parts and labor. The exact price depends on the gate type and whether the strike plate needs to be realigned or replaced. Our technician will show you the written price before any work begins, so you’ll know the number before we start. Call (728) 203-0817 for a free estimate on your specific gate.

What does it cost to weld a broken gate in West Palm Beach?

Welding a broken steel or wrought iron gate in West Palm Beach runs $250 to $500 for a typical crack or split, and $180 to $650 if custom brackets or braces need to be fabricated. Gates near the coast often need extra prep for corrosion before welding, which can push the job toward the higher end. For an exact quote on your gate, call (728) 203-0817; estimates are free and there’s no obligation.

Is it cheaper to repair a gate or replace it?

Repair is almost always cheaper. Most gate repairs in West Palm Beach fall between $95 and $650, while a new gate installation typically runs $2,000 to $6,000 or more depending on size and material. If the gate frame is still structurally sound, welding and replacing the worn parts is the smart money. We’ll give you a straight answer on whether your gate is worth repairing or if replacement is the better long-term call.

Can you fix my gate the same day?

In most cases, yes. Latch and post repairs, hinge replacements, and many standard welding jobs are same-day work once the technician arrives. Calls are answered by a live person 24/7, so if you call in the morning we can often have someone at your gate that day. Call (728) 203-0817 and we’ll give you a time window and a written price before the work starts.

How much does electric gate repair cost in West Palm Beach?

Electric gate component replacement in West Palm Beach typically costs $180 to $750, depending on whether the issue is a sensor, keypad, hinge, or control board. Parts for LiftMaster, FAAC, BFT, Viking, Ghost Controls, and Mighty Mule systems are all within that range for common failures. If the motor itself has failed, that’s a larger job that warrants a separate diagnosis and quote. Call (728) 203-0817 and we’ll help you figure out what’s actually wrong before you spend anything.

Pricing reflects the West Palm Beach market as of 2026. Latch and Post Gate Repair West Palm Beach offers free estimates – call (728) 203-0817.

Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving West Palm Beach since 2009.