Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in West Palm Beach?
Gate installation in West Palm Beach typically costs between $1,800 and $6,500 for a standard residential driveway gate, with the most common jobs landing around $2,900 to $4,200 including the gate, posts, hardware, and labor. Budget-friendly single-swing gates start near $1,200, while custom aluminum or steel driveway gates with electric openers run $7,000 to $15,000 or more. The number that matters is the one on your written estimate, and you’ll see that before any work starts.
This guide breaks down exactly what you’re paying for in the West Palm Beach market in 2026, from the gate itself to the concrete footings that hold it through hurricane season. We’ll walk through real numbers line by line, because a straight answer on price is the only kind worth giving.
Key Takeaways
- Most West Palm Beach gate installations cost $1,800 to $6,500, with the typical job falling between $2,900 and $4,200.
- Electric gate openers add $900 to $2,800 depending on the brand and swing type.
- Concrete footings, permits, and property-specific prep work account for 20% to 40% of the total.
- Labor rates for gate installers in Palm Beach County run $75 to $135 per hour, with most installations taking 1 to 2 days.
- You should get a written price before work begins, every time, no exceptions.
Gate Installation Cost Breakdown (2026)
Here’s what a Pedestrian Gate or driveway installation in West Palm Beach looks like on paper. These are real market ranges for the Palm Beach County area in 2026, based on the jobs we see regularly from El Cid to Ibis to Wellington.
| Component | Typical Cost Range | What It Covers |
|---|---|---|
| Single swing gate (steel or aluminum) | $900 – $3,200 | The gate panel itself, sized to your driveway opening |
| Double swing gate | $2,400 – $6,800 | Two panels for wider driveways, typically 12 to 20 feet total opening |
| Posts and concrete footings | $500 – $1,500 | Steel posts set in concrete, dug to proper depth for South Florida soil |
| Gate hardware (hinges, latch, stops) | $250 – $800 | Hinges rated for the gate weight, latch, drop rod, and positive stops |
| Labor (installation) | $600 – $1,800 | Typically 8 to 16 hours for a one or two person crew |
| Electric gate opener (slide or swing) | $900 – $2,800 | Motor, control board, safety sensors, and wiring |
| Permit fees (if required) | $150 – $600 | City or county permit, varies by municipality |
| Removal and haul-away of old gate | $200 – $500 | Disposal of the existing gate and hardware |
These numbers assume a straightforward installation on a reasonably level driveway with accessible power nearby. When we give you a written price, it includes everything above, line by line, so there’s nothing hiding in the total.
One thing that surprises people in West Palm Beach: the gate panel itself is often less than half the cost. The posts, footings, wiring, and labor are the quiet majority of the bill. That’s why two neighbors with the same gate can pay different amounts, one might need trenching across a paver driveway while the other has conduit already in place.
What Affects Gate Installation Pricing in West Palm Beach
- Driveway material and layout. Concrete driveways are the most common, and they’re also the easiest to work with. Pavers, cobblestone, or shell driveways add labor because the crew needs to preserve the surface while digging footings or running conduit. A curved driveway or one that slopes toward the street also changes the math on gate weight and opener torque requirements.
- Gate material and size. Steel gates hold up to South Florida humidity well when powder-coated, but they’re heavier and cost more to move. Aluminum gates resist the salt air in Waterfront communities like Prospect Park and are lighter on the opener motor, but the material costs a bit more per foot. A 16-foot double swing gate costs roughly twice what an 8-foot single does, plus bigger posts and a heavier opener.
- Electric opener brand and features. LiftMaster, FAAC, and DoorKing are the names we see most in Palm Beach County driveways. A basic LiftMaster single-swing opener adds around $900 to $1,400. A FAAC or DoorKing with battery backup, which matters in neighborhoods where summer storms knock out power regularly, runs $1,800 to $2,800. Solar-powered openers add $600 to $1,500.
- Soil and drainage conditions. Much of West Palm Beach sits on sandy soil over limestone. That’s workable, but in low-lying areas near the Intracoastal, footings may need to be deeper and reinforced due to moisture and occasional flooding. Expect an extra $300 to $800 in labor if the dig is challenging.
- Access and site prep. If the old gate is rusted through and the posts are set in crumbling concrete, removal takes longer. If vines have grown through the hardware, that’s time too. Tight side yards, fences close to the post location, or buried sprinkler lines all add careful hand work that shows up in the labor line.
- Permits and HOA requirements. West Palm Beach proper and some surrounding municipalities require a permit for driveway gates, especially those with electric openers. Fees vary by city. HOA communities like those in RiverWalk or Lakeside Green often have aesthetic restrictions on gate height, color, and style that can push you toward more expensive custom options.
Electric Gate Costs in West Palm Beach
If the gate opens on its own, you’re adding a motor, a control board, safety sensors, and either wiring from the house or a solar panel. Electric gate installation in West Palm Beach starts around $900 for a basic opener on a single swing gate and climbs to $2,800 or more for a dual-leaf slide gate with battery backup and smartphone compatibility.
Here’s what we tell families trying to make sense of electric opener costs:
- Single swing opener: $900 to $1,500 installed. Good for gates up to about 12 feet wide and 600 pounds.
- Double swing opener: $1,400 to $2,200 installed. Two motors working together for wider, heavier gates.
- Slide gate opener: $1,600 to $2,800 installed. Best for driveway shapes where a swing gate would block the approach or when space is tight.
- Battery backup: $300 to $700 additional. Keeps the gate working during the afternoon thunderstorms that knock out power in Westgate and Dorchester Woods.
- Solar panel kit: $600 to $1,500 additional. Works well when running conduit from the house would mean cutting across a long or finished driveway.
All of our technicians are factory-trained on the brands West Palm Beach homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because an opener installed wrong will fail at the worst time, usually during a downpour when you’re trying to get the car into the garage. The right fix happens on the first visit when the technician knows the equipment cold.
How Gate Installation Works, Step by Step
Here’s the order of a typical gate installation with Latch and Post, so you know what’s happening at your house and when.
- Walkthrough and measurements. We measure the driveway opening, check the grade, look at where power is available, and talk through gate style, material, and opener options. You get a written price before anything moves forward.
- Permit check. We verify whether your city or HOA requires a permit and make sure the gate design will pass. This avoids a stop order mid-install.
- Removal of the old gate. If you’re replacing an existing gate, we remove the panels, hardware, and posts. We protect the surrounding area with drop cloths where the work crosses walkways or landscaping.
- Setting the posts. New steel posts go into concrete footings dug to the correct depth for your soil and gate weight. The concrete needs to cure before the gate hangs, which is often why a job spans two days.
- Hanging the gate and hardware. The gate panel goes on with hinges rated for its weight. We set the latch, stops, and any drop rod so the gate closes solidly without slamming.
- Opener installation and wiring. For electric gates, we mount the opener, run the wiring or set up the solar panel, install safety sensors, and program remotes or keypads.
- Testing and cleanup. We open and close the gate through every mode, adjust the force and travel limits, and test the safety reverse. Then we clean up: shoe covers and drop cloths come with every visit, and you get a photo of the clean-up before the technician leaves.
The whole process usually takes one to two days. A simple single-swing gate with no opener can go in a day. A double gate with electric openers, new footings, and permit inspections typically takes two.
How Much Does Gate Installation Cost in West Palm Beach by Type?
Not every gate costs the same, of course. Here’s a quick reference for the styles we install most often in Palm Beach County.
- Residential swing gate (single): $1,200 to $4,500. The classic driveway gate. Manual models sit at the lower end. Electric versions with a quality opener land at $2,200 to $4,500.
- Residential swing gate (double): $2,800 to $8,000. Two panels meet in the middle. Common for wider driveways in neighborhoods with larger lots like those along Flagler Drive.
- Pedestrian gate: $400 to $1,600. A smaller walk-through gate, often installed alongside a driveway gate or for side-yard access.
- Privacy gate for backyard or pool enclosure: $600 to $2,500. Sized smaller than a driveway gate, but still needs posts and hardware. Pool safety regulations can add requirements.
- Custom aluminum or ornamental steel gate: $3,500 to $15,000. When HOA guidelines or a specific look require custom fabrication, the price climbs with materials and detailing.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why a plumb post and a properly aligned latch are the difference between a gate that works quietly for 15 years and one that sags within two.
How to Save on Gate Installation
You don’t need to wait for a sale or haggle. The honest ways to keep your gate installation cost down in West Palm Beach are these:
- Get the post depth right the first time. A shallow footing fails, the gate sags, and you pay for it again. Spending a little more on proper footings now costs less than a re-install later.
- Choose manual over electric if you don’t truly need it. An electric opener adds $900 to $2,800. If you park in the garage and rarely use the driveway gate, a manual gate with a good latch is a perfectly good option.
- Match the gate to your actual opening. A custom-sized gate costs more than a standard width. If your opening is close to a common size, small adjustments to the post locations can save hundreds.
- Plan for power early. If you want an electric gate eventually, mention it during the quote. Running conduit now is cheaper than trenching later across a finished driveway.
- Use a written estimate to compare honestly. Two bids can look similar until you read the line items. One may include removal and haul-away while another adds it as a separate charge. Ask for everything in writing before work begins, and you’ll know what you’re actually comparing.
If you want an exact number for your driveway, call us at (728) 203-0817. Estimates are free, and there’s no pressure to accept anything. You’ll get a written price that covers the whole job, no surprises.
West Palm Beach Gate Installation: Local Pricing Context
West Palm Beach has specific conditions that affect what you’ll pay, and they’re worth naming. The salt air from the Atlantic, the humidity that runs nearly year-round, and the afternoon thunderstorms from June through September all push materials decisions. Powder-coated aluminum and galvanized steel hardware last longer here than untreated metal, and they cost more upfront. It’s a tradeoff that pays for itself over time.
Neighborhood conditions matter too. In older sections of the city around El Cid and Flamingo Park, we see narrow driveways, mature tree roots, and older utilities that can complicate digging. In newer developments west of I-95 like Banyan Lakes or Andros Isle, the ground is often more uniform and the driveways are wider, which makes for a faster, more predictable install. Homes along the Intracoastal in communities like Northwood Shores contend with salt spray that will eat through cheap hardware within a few years.
One thing we see regularly across the city: gate posts set in concrete that was poured too shallow or without proper drainage. When water pools at the base of a post and sits there through a wet summer, rust and rot follow. The fix is the same almost every time, dig it out, set a new post at proper depth with concrete that sheds water, and hang the gate straight. It’s one of the most common gate repair calls we handle, and it’s almost always preventable.
Should You Repair or Replace Your Gate?
Before you commit to a full Gate Installation in West Palm Beach, it’s worth asking whether the gate you have can be saved. Here’s the rule of thumb we use:
- Repair makes sense when the gate panel is structurally sound and the problem is hardware: a failed hinge, a loose latch, a sagging corner, or an opener that stopped responding. Repairs in West Palm Beach typically run $150 to $600 for most hardware issues.
- Replacement makes sense when the panel itself is rusting through, the posts are loose in the ground, or repair costs approach 50% or more of a new gate’s price. If you’re looking at $800 in repairs on a 12-year-old gate that’s showing corrosion at the hinges, replacement often costs less over the next five years.
- Opener-only replacement is a third path. If the gate and posts are solid but the motor is dead, you can replace just the opener for $900 to $2,800 without touching the gate structure.
If you’re unsure, call us. We’ll tell you honestly whether a repair is worthwhile, and you’ll get a written price either way before anything is done.
FAQs – Gate Installation Cost
How much does a gate cost to install in West Palm Beach?
A gate installation in West Palm Beach costs $1,800 to $6,500 for most residential jobs, with the typical driveway gate landing between $2,900 and $4,200 including labor, posts, and hardware. Electric gates with openers run higher, typically $3,500 to $7,500. Call (728) 203-0817 for a free written estimate specific to your driveway.
How much does it cost to install an electric gate opener?
Electric gate opener installation in West Palm Beach runs $900 to $2,800 depending on the gate type and opener brand. A basic LiftMaster single-swing opener starts around $900 to $1,400 installed, while a FAAC or DoorKing with battery backup runs $1,800 to $2,800. Battery backup adds $300 to $700, and solar panels add $600 to $1,500.
Is it cheaper to repair or replace a gate?
Most gate hardware repairs in West Palm Beach cost $150 to $600, while replacement starts around $1,200 and climbs from there. If the gate panel is sound and the problem is a hinge, latch, or opener, repair is almost always cheaper. If the posts are failing or the panel is rusting through, replacement is the better long-term choice. We’ll give you an honest recommendation with a written price, so you can decide without pressure.
How long does gate installation take?
Most gate installations in West Palm Beach take one to two days. A simple single-swing gate without an opener can go in a single day. A double gate with electric openers and new footings typically takes two days because the concrete needs time to cure before the gate hangs.
Can you install a gate the same day?
Same-day installation depends on the scope and our schedule, but we answer calls live around the clock at (728) 203-0817, so you’ll know fast whether we can get to you today. Simple gate replacements are sometimes same-day when the existing posts are sound and the gate is a standard size. Full installations with new footings need at least one full day, often two.
Do I need a permit for a gate in West Palm Beach?
It depends on your location and gate type. West Palm Beach proper and some surrounding municipalities require permits for driveway gates, especially with electric openers. HOA communities often have additional rules about gate height and appearance. We check permit requirements before work starts so your installation doesn’t get interrupted.
Why the Way We Work Matters to the Price
The cost of a gate installation isn’t just the metal and the motor. It’s the care taken during the work, because a gate installed without attention to detail will cost you later in repairs. Our technicians arrive in uniform, are background-checked, and operate under the Cedarwell C.A.R.E. values: Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work.
That means shoe covers before we step inside your home to reach the electrical panel. Drop cloths under the work area so your pavers and walkways stay clean. Quiet tools when there’s a baby napping or a dog already stressed by the noise. A photo of the clean-up before the technician leaves, so you can see exactly how the area was left. None of that is an upsell. It’s just how we work.
And every installation carries the 365-Day Done Right Promise. If the gate isn’t right, we make it right. No argument, no fine print, no chasing us around. That’s a promise from Cody Beckman, who leads Latch and Post Gate Repair West Palm Beach, and it applies to every gate installation, repair, and electric gate repair we do.
We’ve been doing this since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Not a handyman service with a gate side hustle. Not a big-box referral line. Just gate repair, gate installation, and electric gate repair, done carefully and priced in writing.
Get a Written Price for Your Gate Installation
You deserve a straight number before anyone picks up a shovel. Call Latch and Post Gate Repair West Palm Beach at (728) 203-0817 and you’ll reach a live person, any hour, any day. We’ll schedule a walkthrough, measure your opening, talk through your options, and hand you a written price with no pressure to accept it.
Whether you’re replacing a rusted gate in El Cid, adding an electric opener to a driveway in RiverWalk, or putting up a custom gate for a new-build out by Ibis, we’ll give you the same thing: an honest price, a clean install, and a gate that works the way it should.
Pricing reflects the West Palm Beach market as of 2026. Latch and Post Gate Repair West Palm Beach offers free estimates – call (728) 203-0817.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving West Palm Beach since 2009.
What Our Customers Say
"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick