Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Wellington
Gate repair in Wellington usually falls into one of two buckets: a mechanical problem you can see, like a sagging iron gate scraping the pavers, or an electrical fault you can’t, like a board fried by a summer lightning strike. Most repairs in the village run between $180 and $800 depending on what failed, and we can typically reach your property the same day you call. That matters in Wellington, where a gate that won’t open doesn’t just block the driveway, it can bring horse transport to a dead stop during the winter equestrian season. Call (728) 203-0817 and a live person will answer.
We work on the gates Wellington families actually have: heavy ornamental iron swing gates at Palm Beach Polo, sliding gates on acreage off South Shore Boulevard, and underground operators that need to run quiet enough not to spook a horse. Our crews know the difference between a rack and pinion that drifted and a weld that let go at the post footing from years of humidity. You’ll get a written price before we touch anything, and we’ll leave your driveway cleaner than we found it.
Why Latch and Post Gate Repair West Palm Beach Is Wellington’s Preferred Gate Repair Company
Wellington homeowners call us because we treat a gate repair the way they treat their property: carefully, and with an eye for how it looks when the job is done. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and it means we don’t scatter our attention across a dozen trades. We’re a Gate Repair specialist, part of the Cedarwell family of independently owned and operated gate companies.
Cody Beckman leads our team, and he’s trained technicians on the exact brands you see across Wellington driveways: FAAC, BFT, Linear, Viking, and others. A gate that takes a crew three visits to fix costs you three afternoons. We’d rather show up once with the right part. Our techs are background-checked, uniformed, and they follow a care routine on every visit: shoe covers and drop cloths before we step inside, quiet tools if your kids are napping, and a photo of the cleanup before we leave. You’ll also see the price in writing before any work begins, so the invoice never surprises you.
Every repair is backed by our 365-Day Done Right Promise. If it isn’t right, Gate Repair in Wellington means we come back and make it right, no argument, no fine print. A live person answers our calls 24 hours a day, seven days a week. That’s not a call center trick. It’s how we answer our phone.
Styles & brands we work with
Iron Gate Repair in Wellington
Iron Gate Repair in Wellington is a different job than iron gate repair anywhere else in Palm Beach County, and the reason is simple: the village holds a visual standard. A weld that would pass unnoticed on a West Palm Beach commercial lot won’t hide on an ornamental gate at an Equestrian Club estate. The repair has to be strong and match the original design, because Wellington’s community standards are clear about keeping the horse-country character intact.
What we commonly fix on iron gates here: sagging that comes from corrosion at the post footing, where years of subtropical humidity eat the weld between post and hinge plate, which then drags the gate across the pavers. We also repair cracked scrollwork, rust-through on lower rails, and striker posts that shifted as the soil expanded and contracted through three or four rainy seasons. A typical iron gate repair in Wellington runs $220 to $650, depending on whether we’re welding, reinforcing the post, or re-hanging the leaf. You’ll get the exact number in writing before we start.
Weld and Post Footing Repair
Here’s a failure mode we see often in Wellington: the ornamental gate looks fine until you notice the top of the leaf is leaning a few degrees. That lean traces to the bottom hinge, where moisture wicks into the weld and the post steel rusts from the inside. We cut out the corroded section and re-weld with a reinforced plate, often at the same time we set the gate back to plumb.
Ornamental Iron Matching
On a bespoke gate at Palm Beach Polo, a visible patch grind is not acceptable. We match the scroll profile and the bar thickness as close as the original fabrication allows, then we blend the finish so the repair reads as original. This is the part of the job where speed alone doesn’t serve you.
Sliding Gate Repair in Wellington
Sliding Gate Repair in Wellington tends to involve long, heavy gates crossing wide driveway openings, often with an underground operator doing the work. The sun here doesn’t just fade paint; it heats the steel track enough that a misaligned guide can bind in the afternoon. We see gates that slide fine at 8 a.m. and stick by 2 p.m., especially on south-facing exposures.
We service the full assembly: the rack and pinion, the guide rollers, the motor, and the safety photocells. A typical sliding gate repair in Wellington starts around $240 for a replacement roller or a rack adjustment, and ranges up to $800 or more when a gearbox has worn out or the track needs resetting in concrete. You’ll see the written price before we touch anything.
Track Realignment and Guide Roller Replacement
Large equestrian properties often have slide gates that span 16 to 20 feet. That much mass magnifies any track defect. We check the track for wave, the guides for wear, and the rack for missing teeth, then correct the alignment so the gate doesn’t fight itself at the ends of travel.
Underground Operator Service
Underground operators are common on high-end Wellington driveways, where an above-ground arm would interrupt the sightline. These units sit in a pit that floods during the summer rains. We clean and reseal the pit, test the limit switches, and replace the control board if it’s been through one too many storms. The repair should run quietly, and it should stay dry.
Trusted Brands We Service in Wellington
Our techs are factory-trained on the equipment Wellington homes actually have: FAAC and BFT hydraulic operators on estate gates, Linear for access control, and Viking on swing and slide operators. We stock common replacement parts locally for these brands, which means we don’t leave your property waiting on a board to ship from a distributor. That’s a real advantage during the winter season, when a gate failure can stall a horse trailer during event traffic. The right fix on the first visit is the entire point, and it’s why we carry the parts and the training to do it.
Common Gate Repair Problems We See in Wellington Homes
- Corrosion at ornamental iron welds: The humidity that makes Wellington green also rusts the joint where the hinge plate meets the post. A gate that was hung plumb five years ago starts to sag and drag across the pavers, which then wears the finish off the bottom rail.
- Lightning-surge damage to operator boards: Wellington’s summer thunderstorms send surges through the power lines, and a gate operator board is often the casualty. If your gate stopped after a storm, the board likely needs replacement, not a reset.
- Sun-driven track expansion on sliding gates: The subtropical sun heats steel slide tracks enough to shift clearances through the day. A gate that slides cleanly in the morning and binds by afternoon usually needs track realignment, not a new motor.
- Photocell misalignment from shifting pillars: Brick and stucco pillars in Wellington’s expansive soils move a fraction each season. When a pillar moves, the safety photocell beam drifts out of line and the gate refuses to close, which is a safety feature doing its job, but it needs recalibration.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Wellington, FL
Here’s what you can expect to pay in Wellington for the most common gate repairs. A latch or lock replacement typically runs $120 to $280. A hinge repair or realignment on an iron gate runs $180 to $480. A slide track reset or roller replacement starts at $240 and can reach $700 on long, heavy gates. A control board replacement after a power surge usually lands between $350 and $850, depending on the operator brand. A full rack and pinion replacement on a 20-foot estate gate is typically $500 to $900. Every quote is written, itemized, and agreed to before we begin. Call (728) 203-0817 for a free estimate.
We Also Serve Cities Near Wellington
Our crews cover Wellington and the surrounding communities, including Royal Palm Beach, Lake Worth, West Palm Beach, and Palm Beach Gardens. If you live just outside the village and need a specialist who knows equestrian property gates, call us and we’ll tell you honestly whether we can help. Scheduling is coordinated from our Miami office, and crews serve Wellington locally.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wellington
During the November-to-April season, we prioritize gate failures on Wellington properties with horse transport needs, and we can usually reach you the same day you call. A gate that won’t open or close can stall a float or block the only driveway out to South Shore, so we treat those calls as urgent. Call (728) 203-0817 and we’ll give you a straight answer on timing.
Yes, because we plan every repair to pass a visual inspection, not just a mechanical test. We match scroll profiles, bar thickness, and finish tones so the repair reads as original, and we don’t leave grind marks or mismatched paint. That’s the standard Wellington expects, especially inside communities like Palm Beach Polo.
We can. Underground operators are a specialty of ours, and Wellington has a lot of them. The most common issues are flooded pits after the summer rains, failed limit switches, and boards damaged by surge events. We seal the pit, replace the failed part, and test the safety edges and photocells before we leave.
That afternoon stick is usually thermal expansion in the steel track, which shifts the guide rollers out of their clean line. Wellington’s summer sun is intense enough to make that happen daily on a long south-facing track. We realign the track and set the guides to the hot position so the gate glides consistently through the whole day. Call us for an inspection quote, the estimate is free.
We do. Many Wellington estates run a gate operator alongside a video intercom and a camera, and the repair isn’t finished until all three talk to each other. We re-sync the opener with your system, confirm the remote and keypad work, and test the loop detector if you have one. The goal is one seamless entry experience, not a gate that works and a intercom that doesn’t.
Call Latch and Post Gate Repair West Palm Beach
If your gate is dragging, sticking, or dead after a storm, call (728) 203-0817. A live person answers, day or night, and we’ll schedule a Wellington visit that fits your life. You’ll get a written price before any work starts, a technician who covers your floors and cleans up after every job, and the 365-Day Done Right Promise behind the work.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, part of the Cedarwell family since 2009.