Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Palm Beach Gardens
Most gate repairs in Palm Beach Gardens come down to two things: a hinge post that has shifted in sandy soil, or an operator that was never quite right from the start. We fix both, usually in a single visit. Our Gate Repair technicians live and work throughout the northern Palm Beaches, so when your swing gate drags on the paver driveway along Donald Ross Road or a slide gate stalls near the Mirasol clubhouse, we can be there fast. Call (728) 203-0817 and a live person answers, day or night.
Before any work starts, you get a written price. No guesswork, no invoice that arrives bigger than the quote. Our techs wear shoe covers, lay drop cloths where they walk, and send you a photo of the cleanup before they leave. That matters when you have kids and a dog tracking in and out through the same gate all day.
Why Latch and Post Gate Repair West Palm Beach Is Palm Beach Gardens’s Preferred Gate Repair Company
Palm Beach Gardens gates take a beating that gates in most of Florida never see. Salt air off the Atlantic, relentless sun, and daily golf cart traffic through communities like PGA National and Mirasol wear down hardware faster than builders ever planned for. We know which hinges seize first, which control boards cook in the summer heat, and which operator brands hold up under that load. That local knowledge means we show up with the right parts on the truck the first time.
Every technician who comes to your Palm Beach Gardens home is background-checked, uniformed, and factory-trained on the brands families actually have: LiftMaster, FAAC, Elite, and Mighty Mule among them. The work is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print. That is the whole promise.
When you call (728) 203-0817, you reach a person. Not a voicemail box, not a callback queue. Nights, weekends, holidays. If your gate will not close and your dog is eyeing the street, you want a voice on the line, not a recording.
Styles & brands we work with
Gate Welding in Palm Beach Gardens
Gate welding in Palm Beach Gardens is often the right fix when a wrought-iron or aluminum gate has cracked at a stress point, snapped a picket, or torn at the hinge bracket. Rather than replacing the entire panel, we weld the break, grind it smooth, and repaint the affected section so the repair disappears. In communities like PGA National, close to the ocean, we see more rust-through at the bottom rail and hinge plate than anywhere else in the county. Salt air gets into the joints and works from the inside out.
What We Weld and Why
Most weld repairs in Palm Beach Gardens fall into three buckets: hinge brackets torn from the post, lower rails rusted through, and decorative scrollwork snapped by storm debris. We weld these on-site in most cases, which keeps the gate in place and your timeline short. Aluminum gates need TIG welding with the right filler rod, or the repair weakens the surrounding metal; we match the alloy rather than guessing at it.
Cost of Gate Welding in Palm Beach Gardens
A cracked hinge bracket weld typically runs $150 to $300. A rusted lower-rail repair with reinforcement and repainting runs $250 to $450 per affected section. If the damage is extensive enough that multiple pickets need replacing, a partial rebuild often lands between $400 and $800. You will see the exact number in writing before we touch anything, and the 365-Day Done Right Promise covers the weld as much as any other repair we do.
Commercial Gate Repair in Palm Beach Gardens
Commercial gate repair in Palm Beach Gardens means dealing with access-control systems, safety sensors, and slide gate operators that see hundreds of cycles a day, often from golf carts and service vehicles. HOAs, condo communities, and business parks along PGA Boulevard and Military Trail rely on gates that open every time the authorized vehicle approaches and never close on a bumper. We service the automation brands those systems are built on: LiftMaster, FAAC, Elite, and Mighty Mule.
Access Control and Loop Detectors
A commercial gate that stops responding to keypads, fobs, or vehicle loops is usually not a failed operator. In Palm Beach Gardens, salt air corrodes loop-detector leads where they exit the saw-cut in the asphalt, so the system stops seeing cars and the gate starts its close cycle on top of them. We test the loop, replace corroded leads when needed, and reconfigure the operator timing to the actual traffic flow at that entrance.
Commercial Gate Repair Cost in Palm Beach Gardens
Commercial gate repair pricing in the Palm Beach Gardens market depends mostly on what failed. A loop detector repair typically runs $350 to $600. A slide gate roller or track rebuild on a commercial entrance runs $500 to $1,200 depending on gate length and track condition. Operator replacement with programming starts around $950 and goes up with gate weight and access-control integration. We quote the written price before any work begins, every single visit.
Trusted Brands We Service in Palm Beach Gardens
We are factory-trained on LiftMaster, FAAC, Elite, and Mighty Mule, because those are the operators Palm Beach Gardens builders actually installed, and the ones HOAs still specify today. We keep common Palm Beach Gardens parts stocked locally so a failed FAAC control board or a Mighty Mule arm bracket does not mean waiting a week for ground shipping from a warehouse in Texas. Same-brand parts, correct torque specs, and programming done to the manufacturer’s settings rather than improvised on site. That is the only way to keep a gate cycling reliably through another Palm Beach Gardens summer.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Palm Beach Gardens Homes
- Builder-grade operators overheating and stripping gears. The LiftMaster and Linear operators spec’d into many newer Palm Beach Gardens developments are sized for light residential duty, not the 40-plus cycles a day a golf-cart household generates. After two summers, the rack and pinion strips and the gate grinds to a halt. Replacing the gear and dialing in the force settings buys years back.
- Post footings set too shallow in sandy soil. Palm Beach Gardens sits on sandy fill in many areas, and gate posts poured less than 30 inches deep lean within a few seasons. A sag correction that shims the hinges will not hold. The footing needs to be redone. We flag it plainly when that is what the gate actually needs.
- Salt-air corrosion on hinges and bracket hardware. Homes near the Intracoastal and within a mile or two of the ocean get a steady salt film on every exposed metal surface. Hinges seize, bracket bolts rust through, and gate wheels crust over. We replace with corrosion-resistant hardware and treat the pivot points so the gate swings freely again.
- Golf cart strikes knocking pedestrian gates off their hinges. Along cart paths in PGA National, pedestrian gates get clipped by carts more often than anywhere in the county. The hinge post loosens before the panel shows any obvious damage, so the gate starts dragging and the latch stops lining up. Our techs check the post footing first on every PGA National call, not last.
Pricing for Gate Repair in Palm Beach Gardens, FL
Gate repair pricing in Palm Beach Gardens is honest and predictable. A standard gate latch replacement runs $120 to $220. Hinge replacement with post inspection lands between $180 and $350 per hinge set. Operator troubleshooting and repair runs $190 to $500 depending on what failed, and a full operator replacement with installation starts around $750 and goes up with gate weight and automation features. Sagging gate realignment runs $200 to $450. Every job gets a written price before we start, and the 365-Day Done Right Promise backs the work.
Call (728) 203-0817 for a free estimate. We will give you the number in writing, and you decide. No pressure, no phone calls chasing you afterward.
We Also Serve Cities Near Palm Beach Gardens
Our service area for Gate Repair in Palm Beach Gardens extends to North Palm Beach, West Palm Beach, Palm Beach, and Royal Palm Beach. If your gate is a few minutes past the PGA Boulevard exit or up near the Bee Line Highway, give us a call and we will let you know when we can be there.
Serving Palm Beach Gardens, FL - Our Local Coverage Area
We’re based in the Palm Beach Gardens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Palm Beach Gardens
In most cases, the track itself is fine. The problem is the gate posts, pushed slightly out of alignment by years of sandy soil settling and golf cart strikes, so the wheels leave the rail when heavy rain softens the ground. We reset the post footings and re-true the track, then replace the wheels with cart-path-rated hardware that tolerates the frequent cycling PGA National gates see. Call (728) 203-0817 and we will confirm the post depth and footing condition with a site visit.
If your gate was installed before UL 325 safety standards became standard on residential operators, it may not have a photo eye and under current code the operator should not run without one. A photo eye prevents the gate from closing on a child, a pet, or a car bumper. We install them on every operator we service in Palm Beach Gardens, whether or not one came with the house. Estimates are free, and the written price covers the part and the labor.
Yes, and we do it frequently in Mirasol and the surrounding communities. The gate itself usually works fine with a swing operator; what matters is a properly sized operator, a solid hinge-post footing, and the electrical run from the house. In Mirasol we got called out to a builder-grade LiftMaster swing gate that had never closed right since move-in. Our tech found the conduit run from the house to the gate was undersized and the operator was pulling low voltage under load. We pulled a new run, added a UL 325 safety photocell, and the gate now cycles clean even when the golf carts queue up on the path. That same principle applies when you are adding automation to a manual gate: the power run matters as much as the motor.
Yes, it is one of the most common summer failures we see in Palm Beach Gardens. Lightning storms take out keypads, receiver boards, and loop detectors with some regularity, especially in communities with a lot of exposed wiring and older surge protection. We test the keypad first to isolate whether the failure is in the pad, the wiring, or the operator’s receiver board, then replace only what is dead. A keypad replacement typically runs $150 to $300 installed. Call (728) 203-0817 for an exact quote before scheduling.
We start by measuring the post alignment and hinge wear. In many Palm Beach Gardens homes the panel itself is fine; the post has leaned in sandy soil or the hinge pins have worn into an oval shape. We reset the post footing, replace the hinges with oversized pins where needed, and re-hang the gate on the corrected plane. If the frame is racked from years of dragging, we straighten and weld it. No replace-the-whole-panel assumption. We quote the repair for what the gate actually needs, and you approve it in writing before we begin.
If your gate is dragging, stuck open, or grinding at the hinges, call (728) 203-0817. We serve the whole Palm Beach Gardens area, answer the phone around the clock, and give you a written price before any work starts. The gate comes down to two parts: the latch that holds it and the post that carries it. We focus on both, so the open and close is smooth and safe for your family, your pets, and every golf cart that rolls through.
Written by Cody Beckman, Owner at Latch and Post Gate Repair West Palm Beach, serving Palm Beach Gardens and the surrounding communities.